Toshiba SD-370EKE Manuale d'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale d'uso per Lettore DVD Toshiba SD-370EKE. Toshiba SD-370EKE 38. Dvd video player

Stampa la pagina

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment.

• For connection to your TV, see "Connecting to a TV"

(see pages 21~23).

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal flow

Notes

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT

jack of the DVD video player to the AC-3 RF input of

a Dolby Digital Receiver. This input on your A/V Receiver

is reserved for Laserdisc use only and is incompatible with

the COAXIAL DIGITAL AUDIO OUT jack of the DVD

video player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of

the DVD video player to the "DIGITAL (COAXIAL)"

input of a Receiver or Processor.

• Refer to the owner's manual of the connected

equipment as well.

• When you connect the DVD video player to other

equipment, be sure to turn off the power and unplug all of

the equipment from the wall outlet before making any

connections.

• The output sound of the DVD video player has a

wide dynamic range. Be sure to adjust the receiver's

volume to a moderate listening level. Otherwise, the

speakers may be damaged by a sudden high volume

sound.

• Turn off the amplifier before you connect or disconnect

the DVD video player's power cord. If you leave the

amplifier power on, the speakers may be damaged.

Warning

• When you are connecting (via the COAXIAL

DIGITAL AUDIO OUT jack) an AV decoder that does

not have Dolby Digital, Digital Theater Systems

(DTS) or MPEG2 decoding function, be sure to set

"Digital Output" to "PCM" from the on-screen displays

see page 32. Otherwise, high volume sound may

damage your hearing as well as the speakers.

• When playing DTS-encoded discs (DVD Video discs

and audio CDs), excessive noise may be output

from the analogue audio output jacks. To avoid

possible damage to the audio system, you should

take proper precautions when the analogue audio

output jacks of the DVD video player are connected

to an amplification system. To enjoy DTS Digital

Surround™ playback, an external 5.1 channel DTS

Digital Surround™ decoder system must be

connected to the COAXIAL DIGITAL AUDIO OUT jack

of the DVD video player.