9 Other features
Set alarm timer
This unit can be used as an alarm clock. You can
select DISC, iPod/iPhone/iPad, playlist, TUNER
or USB as alarm source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold SLEEP/
TIMER for three seconds.
» [TIMER SET](timer set) scrolls on the
display.
» [SELECT SOURCE] (select source)
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press
/
repeatedly to set hour, then
press SLEEP/TIMER again to confirm.
» The minute digits are displayed and
begin to blink.
5
Press
/
to set minute, then press
SLEEP/TIMER to confirm.
» VOL (volume) is displayed and begins
to blink.
EN
24
6
Press
/
to adjust volume, then press
SLEEP/TIMER to confirm.
»
is displayed.
» To deactivate alarm timer, press
SLEEP/TIMER again.
Note
•
Alarm timer is not available in MP3 LINK mode.
•
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
Set sleep timer
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a time period
(in minutes).
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press SLEEP/
TIMER again until
Listen through headphone
Plug a headphone into the
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the MP3 link cable to:
the MP3 LINK socket
•
•
the audio output jack (usually
headphone jack) of the external
device.
2
Select MP3 LINK source.
3
Play the device.
is
disappears.
socket.