Philips DCD3020/79 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Philips DCD3020/79. Philips DCD3020/79 30.

Stampa la pagina

Note

•

If you are not going to use the remote control for a

long time, remove the batteries.

•

Do not use old and new or different types of batteries

in combination.

•

Batteries contain chemical substances, so they should

be disposed of properly.

Turn on

Press .

» The unit switches to the last selected

source.

Switch to standby mode or Eco

power standby mode

Press

again to switch the unit to standby

mode.

» The clock (if set) appears on the display

panel.

Switch to ECO standby mode:

Press and hold

for more than three seconds.

» The backlight on the display panel turns off.

» The red Eco Power indicator turns on.

Switch between standby mode and ECO

standby mode:

Press and hold

for more than three seconds.

Note

•

The unit switches to Eco Power Standby mode after 15

minutes in standby mode.

Set clock

In the standby mode, press and hold

CLOCK/DISPLAY for over 3 seconds to

activate the clock setting mode.

» The hour digits are displayed and begin

to blink.

Press

to set the hour, and then press

CLOCK/DISPLAY again.

» The minute digits are displayed and

begin to blink.

Press

to set the minute, and then

press CLOCK/DISPLAY to confirm the

clock setting.

Adjust brightness of display

panel

In standby mode, press DIM repeatedly to

select different brightness levels.

Find the correct viewing

channel

Press DISC to switch to disc mode.