Toshiba TDP-MT200 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Proiettore Toshiba TDP-MT200. Toshiba TDP-MT200 44. Dlp projector
Anche per Toshiba TDP-MT200: Manuale d'uso (46 pagine)

Stampa la pagina

Basic operations (Continued)

Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot

adjuster.

q Lift up the front of the projector to

the desired angle, then press the

foot adjuster release button.

The foot adjuster extends. Release the

button to lock the position.

w To adjust the horizontal angle, use

the tilt adjuster.

To stow the foot adjuster, hold up the projector

while pressing the foot adjuster release button,

then slowly lower the projector.

Adjusting the screen size and focus

q Use the zooming lever to adjust the screen size.

w Use the focusing lever to adjust the focus.

Readjusting the projection size with the

zooming lever after focusing will cause the

projected image to be out of focus. In that case,

perform focusing again.

Notes

• Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly.

• A lamp is consumable item. If used for extended periods, images will appear dark, and

the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The

lifetime of the lamp depends on conditions of use.)

• The DMD

is made using extremely advanced technology, but there may be black spots

(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please

note that these are not malfunctions.

• Although this projector supports a wide range of RGB signals

be expanded or shrunk, which will affect image quality slightly.

• With some models of computer having LCD displays or the like, displaying images

simultaneously on the projector and the monitor's display may prevent the images from

displaying properly. If this happens, turn off the computer's LCD display. For information

on how to turn off the LCD display, see the owner's manual of your computer.

• If a signal not supported by the projector is input, the "Unsupported signal" will appear.

• If no signal is being input from the connected device, the "No signal" will appear.

• If an unavailable operation button is pressed, the

p.39

icon will appear.

, any resolutions will