Toshiba TDP-MT700 Manuale d'uso - Pagina 23

Sfoglia online o scarica il pdf Manuale d'uso per Proiettore Toshiba TDP-MT700. Toshiba TDP-MT700 34. Home theater projector
Anche per Toshiba TDP-MT700: Manuale d'uso (36 pagine), Manuale di servizio (49 pagine)

Stampa la pagina

English

Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments

are not shown on the screen.

Personalizing the projector menu display

The On Screen Display (OSD) menus can be set according to your preferences. These settings will

not affect the projection settings, operation, or performance.

• Language in Setup menu sets your familiar language for the on-screen menus.

• You can select projector's Background Color from grey, black, or blue in Options menu.

• OSD Off (Secs) in Options Menu sets the length of time the OSD will remain active after your last

button press.

• Sleep Timer (Min) in Options menu sets the length of time the projector will auto shutdown.

• OSD Position H and OSD Position V in Options menu adjust the OSD position on the screen.

Saving and loading the video memory

Press the PICTURE MODE selection buttons on the remote control

or MEMORY

There are 3 user memories stored according to your preference.

For information about saving user memories, refer to

Using PIP (Picture-In-Picture) and POP (Picture-On-Pic-

ture) functions

There are two groups of inputs classified according to their display modes:

Video Group: Video, and S-Video inputs.

Graphic Group: Component 1, Component 2 (BNC), GBRHV (BNC), and HDMI inputs.

The PIP function allows the projector to display one input from the

Graphic Group within one input from the Video Group (Graphic on

Video), or display one input from Video Group within one input from

the Graphic Group (Video on Graphic).

The POP function allows the projector to display one input from the

Graphic Group and one input from the Video Group side by side

(Video by Graphic or Graphic by Video).

If you want to view two images from 2 different input signals at the

same time, refer to the following steps to display the second image.

1. Select one input source by pressing one of the INPUT buttons

on the remote control.

2. Press PIP or POP button on the remote control.

3. Select the second signal input on the remote control.

4. You may press PIP or POP button repeatedly to choose the corresponding positions of the

images.

5. Toggle the SWAP button on the remote control to switch the active window between the two

windows. In the active window, you are allowed to change the input signal settings.

6. To adjust the size of the PIP window, press + or -.

on the projector to recall the settings directly.

p.29

Video

Graphic

Video

Graphic

Using the projector and remote control

Video on Graphic

Graphic by Video