Toshiba TDP-P75 Manuale d'uso - Pagina 34
Sfoglia online o scarica il pdf Manuale d'uso per Proiettore Toshiba TDP-P75. Toshiba TDP-P75 45. 2,300 ansi-lumens contrast 2,000 : 1 ddr dmd technology
Anche per Toshiba TDP-P75: Specifiche tecniche (2 pagine)
Stampa la pagina
English
3. Default setting menu
FUNCTION
Projection
mode
Auto input
search
Language
Start-up
screen
Fan mode
Power on
34
Operation
DESCRIPTION
The projector can be installed on a ceiling or behind a screen,
or with one or more mirrors. Contact your dealer for the ceiling
mount bracket (optional accessory) if you need to install the
projector on your ceiling.
For more information, refer to
Sets whether the projector searches automatically for input
signals. If the source scan is on, the projector will scan for input
signals until it acquires a signal. If the function is not activated,
the projector selects the last used input signal.
Language sets the language for the OSD control menus.
Use 3/ 4button on the projector or remote control to select
your desired language from among English, French, German,
Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, and Korean.
Enables the user to select which logo screen will appear during
projector start-up. Three modes are available: Default (Toshiba
logo), black screen or blue screen.
A mode used for extreme environments like high altitude. We
recommend you set High when your environment is higher
than 3000 feet above sea level.
Press 3 or 4button on the projector or remote control to
select.
Operation under high fan mode may cause a higher decibel
operating noise level because of increased fan speed neces-
sary to improve overall system cooling and performance.
If you use this projector under other extreme environments
excluding the above, it may display auto shut-down symptoms,
which is designed to protect your projector from over-heating.
In cases like this, you should switch to High fan mode to solve
these symptoms. However, this is not to state that this projector
can operate under any and all harsh or extreme environments.
Set whether to turn on the power when the ON/STANDBY
button is pressed (Manual), or when the power cord is plugged
in (Auto).
p.22
.