Croydex WC410222 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Arredamento per interni Croydex WC410222. Croydex WC410222 2. White cabinets

Stampa la pagina

Image for reference only

Assemble the Hang 'N' Lock bracket sections making sure all parts are

slotted together tightly.

Place the Hang 'N' Lock bracket onto the hanging baton at the back of the

cabinet and measure the dimension 'A' – See fig.1.

Determine the desired location of the cabinet and mark a point at the

top edge of the cabinet on the wall surface. Using dimension 'A' draw a

horizontal reference line below the top mark to determine the position of

the bottom edge of the Hang 'N' Lock bracket.

Drill the marked holes to a depth of

45mm. Insert the wall plugs level with

the surface of the wall. (Note: if you

are fitting the product to a tiled surface,

insert the wall plugs below the surface

of the tile to avoid cracking the tile)

Insert 2 x screws (either countersink or

standard screws can be used) through

the Hang 'N' Lock cams and loosely

secure the Hang 'N' Lock bracket to

the wall.

Insert the cover caps into the two

remaining holes in the backing panel

and place the shelf supports in the

desired locations. Place the glass

shelf on to the supports to complete

the assembly.

Top edge of cabinet

'A'

Bottom edge of Hang 'N' Lock bracket

With the Hang 'N' Lock bracket loosely

attached to the wall, adjust for height

and level by rotating the cams with

a flat head screwdriver aligning the

bottom edge of the HNL bracket with

the reference line, then fully tighten the

mounting screws using a philips

screwdriver, to securely fix the bracket

into position. Adjust for level if

required.

To adjust cabinet hinge:

Remove cap if

fitted.

For details of the other items in the Croydex range please

visit our website: www.croydex.com

Croydex Ltd, Central Way, Andover, Hants, SP10 5AW, UK

Tel: +44 (0) 1264 365881

Fax: +44 (0) 1264 356437

Email: [email protected]

Marked Screw Position

Place the bottom edge of the

Hang 'N' Lock bracket onto the

reference line and using a pencil, mark

the screw hole positions in each cam

recess. Remove the Hang 'N' Lock

bracket from the wall surface prior to

drilling.

UNLOCKED

LOCKED

Fit the cabinet onto the Hang 'N' Lock

bracket, aligning the holes in the

cabinet with the corresponding slots

on the Hang 'N' Lock bracket. Secure

in position by inserting the two locking

studs through the holes inside the

cabinet. Rotate the studs 90 degrees

clockwise to lock into position.

Press quick release button to remove

door from cabinet.

CAB 086 R03