Dimplex CXLS12N Manuale di istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Riscaldatore Dimplex CXLS12N. Dimplex CXLS12N 8. Ultra-slim automatic storage and convector heaters
Anche per Dimplex CXLS12N: Istruzioni per l'uso (5 pagine), Manuale di istruzioni per l'installazione (8 pagine), Istruzioni per l'uso (5 pagine), Manuale di istruzioni per l'uso (11 pagine)

19. Remove the convector circuit mains block and insulation card from

the left side of the base panel. Unclip the wires running across the heater

below the inner front.

21. Carefully lift the bottom of the front inner skin panel out of the retaining

ﬂ ange at the base of the heater, taking care not to damage the insulation,

hydraulic thermostat probe, heating elements and other vulnerable

components attached to this panel.

23. Remove one element to allow access for the back row of bricks. On the

CXL24N/CXLS24N remove the element to right of centre, on the CXL18N/

CXLS18N remove the central element and on the CXL12N/CXLS12N

remove the left hand element. Loosen the two screws securing the element

tails in the ceramic block, and lift the element up and out of the heater.

20. Remove screws retaining front inner skin.

22. Remove the internal packing by sliding it up and off the elements, taking

care not to damage the insulation.

24. Position the bottom rear layer of bricks with the airway restrictions

coincident with the air slots in the base insulation slab. Push the bricks

ﬁ rmly to the back of the heater. Fit the top rear row of bricks, with the

airway restrictions uppermost.