3Com 8500 Manuale di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio rapido per Punto di accesso wireless 3Com 8500. 3Com 8500 10. Wireless lan access point
Anche per 3Com 8500: Scheda tecnica (4 pagine), Scheda tecnica (4 pagine), Manuale di avvio rapido (8 pagine)
Stampa la pagina
09-2292-00AC.fm Page 8 Tuesday, March 11, 2003 3:53 PM
Additional Country Restrictions
In Israel, this product must be configured to operate on a legal channel. Channels 5 - 7
I
are allowed.
In Jordan, this product must be configured to operate on a legal channel. Channels 10 - 13
I
are allowed.
User documentation should be consulted to ensure that this product is used in accordance with local
spectrum restrictions.
Safety Information
This equipment must be installed in compliance with local and national building codes, regulatory
restrictions, and FCC rules. For the safety of people and equipment, only professional network personnel
should install the access point, cables, and antennas.
CAUTION: To comply with FCC radio frequency (RF) exposure limits, a minimum body-to-
antenna distance of 1 meter (3 feet) must be maintained when the access point
is operational.
CAUTION: To avoid possible injury or damage to equipment, you must use either the
provided power supply or IEEE 802.3af compliant power supply equipment that is safety
certified according to UL, CSA, IEC, or other applicable national or international safety
requirements for the country of use. All references to power supply in this document refer
to equipment meeting these requirements.
CAUTION: It is the responsibility of the installer to ensure that the Power-over-Ethernet
(POE) power supply is properly connected. Connection to any other device, such as a
standard Ethernet card or another POE supply, may result in permanent damage to
equipment, electric shock, or fire. Refer to the installation instructions for proper installation
CAUTION: The 3Com power supply (part number 61-0127-000) input relies on a 16A rated
building fuse or circuit protector for short circuit protection of the line to neutral
conductors.
CAUTION: If you supply your own Ethernet cable for connecting power, be sure that it is
category 5 straight-through (8-wire) cable that has not been altered in any way. Use of
nonstandard cable could damage the access point.
Copyright © 2003 3Com Corporation. All rights reserved. 3Com, the 3Com logo, and
registered trademarks of 3Com Corporation. All other company and product names may be trademarks of
the respective companies with which they are associated.
09-2292-000 Rev AC
Published March 2003
SuperStack
are