CRU Dataport Data Express DX115 SAS/SATA 6G Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Immagazzinamento CRU Dataport Data Express DX115 SAS/SATA 6G. CRU Dataport Data Express DX115 SAS/SATA 6G 2.
Anche per CRU Dataport Data Express DX115 SAS/SATA 6G: Manuale di avvio rapido (3 pagine)
Stampa la pagina
b. Insert the included Data Express Key into the keylock and turning it 90 degrees clockwise to
secure the carrier to the frame.
c. Press and hold the Power Button to power the unit on until the Drive Ready LED begins to
flash and the hard drive inside begins to spin up.
NOTE: If the drive is already installed in the receiving frame before a system
power up, you do not have to press and hold the switch to power on the drive.
When any hard drive is first used with the DataPort 25 Secure it will show up as a blank,
unallocated drive and you'll need to format the drive inside the enclosure before you can use it.
Note that formatting a drive will erase all data on the drive, so be sure to back up your
data before beginning this operation.
1.4 Safe Carrier Removal
a. Turn off the computer or properly dismount the drive from the system. Disconnecting the unit
without first unmounting the volume can result in data loss.
Mac Systems
Unmount the volume before powering down the unit by dragging the
volume's icon to the trash bin, or by selecting the volume then pressing
Command-E.
Windows Systems
Unmount the DX115 before powering it down by left-clicking the green arrow icon on the task
bar (in Windows XP) or the USB plug icon with the green checkmark on the Desktop task bar
(Windows Vista, 7, 8), and then selecting the proper device from the menu that pops up. You
may have to click on the "Show Hidden Icons" arrow on the task bar to find the correct icon.
Windows will indicate when it is safe to disconnect the DataPort 25.
b. Use the DataPort Key to turn the keylock 90 degrees counter-clockwise to unlock and power
off the unit.
c. Push the eject button below the keylock once to release the button, and again to eject the
carrier.
2 Identifying the Parts of Your DX115 6G
Push Here to Eject Carrier
Carrier Handle
Key Lock
Click-connect plate
GND
Host Activity
Reserved
LED Pin
HDD LED
Pins
Activity Disable
Figure 2 - DX115 Receiving Frame Rear Panel
3 Other Configuration Options
3.1 LED Activity
LED Name
Color
State
Drive Ready/Error
Blue/Red
Flashing Blue
Solid Blue
Flashing Red and Blue Fan failure. Please contact Technical Support.
Solid Red
Drive Activity
Amber
Flashing
*Some SATA PC systems/host controllers provide support for the Drive Activity LED feature (refer to the SATA PC
system/host controller manufacturer's documentation for further information). The Drive Activity LED can be enabled
via host connection (cable not included) to Pin 1 located on Receiving Frame Motherboard (Figure 2). Refer to the SATA PC
system/host controller manufacturer's documentation for further information.
3.2 Fan Error LED Disable Switch
This switch (see Figure 1) allows the user to disable the Fan Error LED (insert a paper clip or similar
object to activate switch). CRU-DataPort recommends replacing a faulty fan immediately. Contact
Technical Support to obtain a new fan.
RTX220 QR - Manual
Figure 1: Front Bezel
SAS/SATA
Power Connector
Connector
Cooling
Fan
Description
Drive is inserted and powering up.
Drive is powered on and ready for access.
DC power failure. Please contact Technical Support.
Indicates when the host computer is accessing data on
the drive.*
Drive Ready/Error
LED
Drive Activity LED
Fan Error LED
Disable Switch
Power Switch