aeolus KaniStar Warmology WMS-1501 Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici aeolus KaniStar Warmology WMS-1501. aeolus KaniStar Warmology WMS-1501 5.
Stampa la pagina
Quick Start Guide
The day the unit is delivered, an inspection of the outer packing should be made first for any damage
to the packing box.
Then the unit should be unpacked carefully, all components and the machine should be inspected for
any damage.
If any damage is evident, the carrier or dealer should be notified immediately.
The manufacturer is not liable for any damage caused by a third party "transport or delivery company".
The unit should be placed in a well ventilated position and all inlets and outlets should be unobstructed.
There should be a 10cm or 4-inch clearance on all sides.
Connect the air flow hose to the air outlet.
Connect the power cable to a suitable power outlet, the unit is now in standby mode.
Press and hold the sterilization button on the control panel for 3 seconds. The unit will begin
sterilizing process for approximately 5
minutes, countdown will be displayed on the
LCD screen. Sterilizing can be cancelled by
pressing the same button. No other function
on the unit will operate during this process.
When sterilizing has concluded, the unit is
ready to be used.
You can now attach the desired attachment
to the hose.
The fan speed default is set at "high". Fan
speed can be changed at this time.
Then select the operating temperature by
choosing one of the 5 pre-set temperature
buttons on the control panel to start the
machine.
The LCD screen will display: current
temperature (in large font), selected
temperature and elapse time (in small font).
Temperature Settings
Standby Button
Precision
Negative Ion
LCD Display
Generator
Ambient
Sterilization
Temperature
Adjustable
Fault Alarm
Wind Speed
(two stages)
Over Heat Alarm
Four Pre-set
Working
Temperature
Temperature
Setting
Indicator Light
02
If a different temperature is selected during
use, the elapse time will be reset automatical-
ly to zero.
By holding the same temperature selecting
button,
the
accumulative
time
will
be
displayed.
The green light will illuminate when the
working temperature is reached.
The negative ion generator can be selected at
any stage of operating from the control panel.
This will provide a sterilized air flow to the
blanket.
The fan speed can be adjusted at any time.
Note: The unit will not operate correctly if the holes are not facing in the correct direction. This could
result in overheating or malfunction.
Only KaniStar accessories should be used with the WMS-1501.
The unit should not be used with accessories or parts other than the manufacturer's parts or accesso-
ries.
Any other supplies' parts that are used in the unit will be used at the risk of the operator.
All warranty will be void and no responsibility will be taken by KaniStar if any of the instructions are not
strictly followed.
Only operated under the guidance of qualified licensed veterinarian.
WMS-1501-ST
WARMOLOGY BODYSUIT（Optional Accessory）
1. The body suit fully envelops the torso and limbs. (The limb wrap is our exclusive patented system).
2. Disposable nonwoven material, very cost effective.
3. Evenly distributes heat through 3D outlets system on wrapping "suit".
4. The best choice for anaesthesia temperature management.
5. Different sizes available for small, medium and large animals.
6. Can be used with WMS-1501-MT mat to form a complete warming system.
7. Non-inflatable paw guards against thermal injury to the heat-sensitive paws and lower legs.
8. Durable and flexible materials that provide the ability to warm patients in various positions.
9. Disposable blankets are designed for single use only to create a sterilized environment and avoid
cross contamination.
S
M
L
03