Crua Outdoors Loj TT6 Istruzioni per il lancio - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per il lancio per Tenda Crua Outdoors Loj TT6. Crua Outdoors Loj TT6 7.

Step 5:

Inner Tent Construction

Stage 1:

 Open the contents of the inner tent bag and remove the insulated material

and the inner poles.

 Lay out the inner tent inside the outer tent and clip into place using the

buckles along the ground of the sleeping area (Fig. 5A)

 Open the front doors of the inner tent as it lays on the ground to allow access

to stand during installation (Fig. 5B)

 Start to clip in inner tent in place but to no more than halfway up the walls

(Fig. 5C)

 Insert poles into the 3 pins at the back of the inner tent, floor level. Note

yellow pole is in the middle and red at both sides. Clip the tent onto these

poles as well (Fig. 5D)

Fig. 5A

Fig. 5C

Fig. 5B

Fig. 5D