CRUISING ELECTRONICS SD10D Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Altoparlanti CRUISING ELECTRONICS SD10D. CRUISING ELECTRONICS SD10D 2.

Use 8 good quality C size alkaline batteries, eg Eveready Energizer or Duracell.

* NiCd or NiMH batteries produce a lower voltage, and the unit may not operate correctly with them

* Take care to ensure the batteries are inserted correctly

* Remove the batteries if the megaphone will not be in use for a long period of time

* A complete portable and re-chargeable battery system, including a charger, is available for heavy use applications

See our website for details and pricing www.cruisingelectronics.co.nz

* Open the battery compartment by releasing the catch on the top rear of the Megaphone.

* Remove the plastic battery holders from the rear compartment of the Megaphone

* Each plastic holder is marked on the side with the correct way to load the batteries

* Note the slight lip around the edge at one end of the battery holders This lip should face downwards

* Taking very careful note of the markings, place four C size batteries into each holder

* With the lip facing downwards, insert the holders, complete with batteries, into the Megaphone

* Be sure to follow the illustration when inserting the holders into the compartment

The illustration below, looking down on the top of the Megaphone, shows the battery holders inserted

into the Megaphone in the correct manner.

The + indicators as drawn below show you the TOP of the battery as shown above

BATTERY PLACEMENT

THIS SHOWS THE TOP + END OF A BATTERY