Aeon Labs D/W Sensor Manuale - Pagina 14

Sfoglia online o scarica il pdf Manuale per Accessories Aeon Labs D/W Sensor. Aeon Labs D/W Sensor 20. Door/window sensor

Press the button labeled "Remove" on the Aeon Labs Minimote

Stick to begin the Z-Wave removal process.

Remove

Note: To remove the Aeon Labs D/W Sensor with other

controllers, please consult the operation manual for these

controllers on how to remove Z-Wave products from an existing

network. For instructions on select partner gateways, visit

www.aeon-labs.com/support.

7.2 Press the security tamper switch located at the back of the

Aeon Labs D/W Sensor to remove it from your Z-Wave

network.

Troubleshooting: If the Aeon Labs D/W Sensor was removed

from the Z-Wave network, pressing the security switch will

illuminate the LED on the front of the Aeon Labs D/W Sensor

solid red for 5 seconds. If the Aeon Labs D/W Sensor was not

successfully removed from the Z-Wave network, the LED will

blink instead of staying solid.