Crux Sightline MRVBM-77Q Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Elettronica per autoveicoli Crux Sightline MRVBM-77Q. Crux Sightline MRVBM-77Q 7. Backup camera and video interface for 2017 and up bmw & mini vehicles with evo2 idrive5 systems

Stampa la pagina
INTERFACING SOLUTIONS

REMOTE CONTROL:

ON SCREEN DISPLAY (OSD) SETTINGS:

Adjusting Screen position and size (First Level Menu)
Menu of FACTORY
IMAGE
H-POSITION
PARK
V-POSITION
UTIL1
UTIL2
INFO
MENU to Return
Setting the Rear View Camera (Second Level Menu)
Menu of FACTORY
IMAGE
PAS TYPE
PARK
PAS SETUP
UTIL1
REAR TYPE
UTIL2
SAFE ENABLE
INFO
RADAR ENABLE
MENU to Return
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
Sightline
R
Multi View Integration
KEY
POWER & PIP
MENU
OK
Move LEFT (Press for 2 seconds to Access Factory Mode)
SEL to Select/Save
PAS TYPE: Parking Guide Line Setting
PAS SETUP: Adjusting the position of the parking guide line
REAR TYPE: Choose Rear Camera Recognition
SEL to Select/Save
RADAR ENABLE: Setting up the parking Distance Alarm Sensor
SAFE ENABLE: ENABLE to enter OSD Menu
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2017 and up BMW & Mini Vehicles with Evo2 iDrive5 Systems
FUNCTION
No Function
Activate OSD Menu
Make the selection / Change the image display
Move UP
Move DOWN
Move RIGHT (Press for 2 seconds to Reset User Data)
H-POSITION : Move the image horizontally
V-POSITION : Move the image vertically
H-SIZE(NAVI) : Adjust the size of navigation
image horizontally
- NOT USED: No use parking guide line
- PAS ON: Selecting Dynamic parking guide line
- PAS OFF: Selecting fixed parking guide line
- CAN: Reverse Camera is triggered by CAN when shifting into
reverse. CAN wire of module must be connected to CAN
wire of car.
- LAMP: Reverse Camera is triggered when the reverse light
turns on. Connect "Rear-C" cable of the power cable the
reverse light.
3 of 7
MRVBM-77Q
Backup Camera and Video Interface for
rev.110419