Aeon Labs Nano Shutter Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Aeon Labs Nano Shutter. Aeon Labs Nano Shutter 10.

Current StateAt 0%

Button pressed

Move to

once

100%

Touch panel control.

As you can see that the Nano Shutter's surface has a pin port, this port is used to connect the Touch panel. When you

have already connected it to the Nano Shutter, you will be possible to control the Nano Shutter through the Touch panel

directly.

Reset your Nano Shutter.

If at some stage, your primary controller is missing or inoperable, you may wish to reset all of your Nano Shutters settings

to their factory defaults.

To do this, press and hold the Action Button for 20 seconds and then release it. Your Nano Shutter will now be reset to its

original settings, and the green LED will be solid for 2 seconds and then remain the colorful gradient status as a

confirmation.

• Hard Reset Nano Shutter - Press and hold "Action button" down for 20 seconds.

Moving to

Moving to 0%

100%

Stop

At 100%

Stop

Move to 0% Toggle