Aeon Labs Minimote Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Telecomando Aeon Labs Minimote. Aeon Labs Minimote 7. Z-wave remote controller
Anche per Aeon Labs Minimote: Manuale (7 pagine)

Stampa la pagina

• Associating Z-Wave Lights/Switches/Gateways to Z-Wave Sensors in the Network

1. Press the button labeled "Associate" – The blue LED will blink slowly to indicate that

the Minimote has entered Association-Mode.

2. Press the Z-Wave button on the product you wish the sensor to communicate to -

The blue LED will blink quickly to indicate detection of the Z-Wave device.

3. Press the Z-Wave button on the sensor - The blue LED will stay solid for 2 seconds

to indicate success, the red LED will stay solid for 2 seconds to indicate failure.

4. Repeat step #3 for all sensors you wish to be controlling the device in step #2 or

press any button on the Minimote to exit Association-Mode. (The blue LED should

be blinking quickly again as in step #3.)

• Becoming a Secondary/Inclusion Controller to Another Z-Wave Controller or Gateway in

an Existing Z-Wave Network

1. Press the button labeled "Learn" – The blue LED will blink slowly.

2. Press the button labeled "Include" on the other Z-Wave controller - The blue and

red LEDs will blink quickly to indicate detection of the other Z-Wave controller.

Consult the operation manual of other controllers for instructions on how to add

the Minimote as a secondary/inclusion controller into an existing network.

3. The blue LED will stay solid for 2 seconds to indicate success; the red LED will stay

solid for 2 seconds to indicate failure.

• Resetting the Minimote

1. Press and hold both the buttons labeled "Associate" and "Learn" for 10 seconds –

The red LED will blink from slow to fast.

2. The blue LEDs will stay solid for 2 seconds to indicate success.

• Rediscovering/Healing/Fixing the Z-Wave Mesh Network

1. Press and hold the button labeled "Include" 10 seconds – The blue and red LED will

blink quickly to indicate the rediscovery has begun.

2. The blue LEDs will stay solid for 2 seconds to indicate success.