Pioneer AVIC-X1R Manuale hardware - Pagina 14

Sfoglia online o scarica il pdf Manuale hardware per Ricevitore per auto Pioneer AVIC-X1R. Pioneer AVIC-X1R 27. Dvd av navigation head-unit
Anche per Pioneer AVIC-X1R: Manuale (39 pagine), Manuale hardware (30 pagine)

Stampa la pagina

❒ If the DVD drive does not operate properly, an

error message such as ERROR-11 may be

displayed.

➲ Error messages ➞ Operation Manual

Adjusting the volume

• Use VOLUME to adjust the audio sound

level.

With this product, rotate VOLUME to

increase or decrease the volume.

❒ To adjust the navigation volume, go to the

navigation menu.

➲ Navigation volume adjustment ➞ Opera-

tion Manual

Turning the source off

• Press SRC button and hold until the

source turns off.

❒ This product can be switched off by turn-

ing the ACC (ignition) OFF or detaching

the front panel.

Using the REAR button

You can output the sound and video of the disc in

the built-in DVD drive to the rear display regard-

less of whether DVD drive is selected as the

source or not (REAR ON mode).

• When you have turned the REAR ON mode

on by pressing REAR button, you cannot

turn it off even if you press SRC button

and hold. In this case, press REAR button

to turn the REAR ON mode off.

• Press REAR button to turn the REAR ON

mode.

The sound and video are outputted to the rear

display and the illumination colour of REAR

button changes to different colour.

❒ To turn the REAR ON mode off, press

REAR button again.

❒ When a CD or CD-ROM is inserted, sound

only is output to the rear display.

➲ Selecting the video of rear display ➞ Opera-

tion Manual

Opening and closing the LCD

panel

• Do not close the LCD panel with hands by

force. This may cause malfunction.

The LCD panel will be opened or closed automati-

cally with the turning of the ignition switch on or

off. You can turn off the automatic close/open

function.

➲ Setting the automatic close/open function ➞

Operation Manual

• The automatic close/open function will operate

the display as follows.

— When the ignition switch is turned OFF

while the LCD panel is open, the LCD panel

will close after six seconds.

— When the ignition switch is turned ON

again (or turned to ACC), the LCD panel will

open automatically.

— Removing or attaching the front panel will

automatically close or open the LCD panel.

➲ Removing the front panel ➞ Page 15

• When the ignition switch is turned OFF after

the LCD panel has been closed, turning the

ignition switch ON again (or turning it to ACC)

will not open the LCD panel. In this case, press

OPEN/CLOSE button to open the LCD panel.

• When closing the LCD panel, check to make

sure that it has closed completely. If the LCD

panel has stopped halfway, leaving it like this

could result in damage.

• Press OPEN/CLOSE button to open the

LCD panel.

❒ To close the LCD panel, press OPEN/

CLOSE button again.

Adjusting the LCD panel angle

Important:

• If you can hear the LCD panel knocking

against your vehicle's console or dashboard,

press ANGLE (–) button to move the LCD

panel a little forward.