Pioneer AVIC-X930BT Istruzioni per l'aggiornamento del firmware

Sfoglia online o scarica il pdf Istruzioni per l'aggiornamento del firmware per Ricevitore per auto Pioneer AVIC-X930BT. Pioneer AVIC-X930BT 2. Multimedia av navigation receiver
Anche per Pioneer AVIC-X930BT: Manuale di avvio rapido (2 pagine), Istruzioni per l'aggiornamento del firmware (2 pagine)

Stampa la pagina

Pioneer AVIC-X930BT Istruzioni per l'aggiornamento del firmware

FIRMWARE UPDATE INSTRUCTIONS FOR AVIC-X930BT

Important:

Please download and print these AVIC-X930BT Firmware Update Instructions for your reference when

downloading and installing the firmware update. It is very important that all steps be completed correctly and

in the order described below.

WARNING! The integrity of data stored onto your navigation system cannot be guaranteed during

the firmware update process.

Note: If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support

Center toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time).

Before Updating

Check the model number of your system to confirm that you have an AVIC-X930BT system.

•

See lower left side of the face panel for the model number of your system.

Please do NOT perform any further steps of this firmware update if your model number shows

"AVIC-X910BT" or "AVIC-X920BT" or any other model number (aside from "AVIC-X930BT").

Otherwise, this firmware update could cause critical damage to your navigation system.

Check the version number of your current software by completing the following steps:

•

Press the "HOME" key

•

Select the "Settings" tab

•

Select "System Settings"

•

Select "Service Information"

•

Press and hold the upper left corner of the "Service Information" screen for a few seconds

•

The "Platform Version" number and the "Application Version" number will be displayed --please

The "Platform version" number and the "Application version" number will be displayed --please look

look at the "Application Version" number, which is displayed on the second line; and

at the "Application Version" number, which is displayed on the second line; and

If the "Application Version" shows 3.001 or higher, then your AVIC-Z130BT is already equipped with the

If the "Application Version" shows 3.001 or higher, then your AVIC-X930BT is already equipped with the

latest software version and there is no need for this firmware update. If the "Application Version" shows

version 3.000 or lower, please proceed with the update.

If you are downloading the firmware update, please proceed to the next step. If you are using a

preloaded update microSD card, please go directly to Step 3.

Downloading the Firmware Update

Step 1

Download the firmware update by clicking

Firmware/Z130BT_X930BT_FirmwareUpdate_3.001000.exe. Once you have downloaded the file to your

computer, locate the file on your computer and double click the file to decompress it. If you do not have a

decompression utility installed on your computer, you can download WinZip at

(purchase may be required).

Step 2

Copy the 'AVICZ110' folder onto a blank microSD card. While the folder name may be confusing,

'AVICZ110' is the correct file. Do not rename the folder or alter the content of the files within as this

will prevent the AVIC-X930BT from properly loading the update.

*Note: Ensure that the AVICZ110 folder is located within the root (top) layer of the microSD card. Make sure

that the microSD card is at least 256MB or larger.

http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/Car-

http://www.winzip.com