Pioneer AVIC-Z2 - Navigation System With DVD player Manuale hardware - Pagina 11
Sfoglia online o scarica il pdf Manuale hardware per Ricevitore per auto Pioneer AVIC-Z2 - Navigation System With DVD player. Pioneer AVIC-Z2 - Navigation System With DVD player 24. Dvd multimedia av navigation server
Anche per Pioneer AVIC-Z2 - Navigation System With DVD player: Istruzioni per l'aggiornamento del firmware (5 pagine), Manuale di avvio rapido (2 pagine)
Stampa la pagina
❒ Never touch the LCD screen with anything
besides your finger when operating the Touch
Panel functions. The LCD screen can scratch
easily. (The stylus is supplied for special cali-
brations. Do not use the stylus for normal
operation.)
➲ For details about handing the LCD panel ➞
Page 18
For comfortable LCD viewing
Due to its construction, the viewing angle of the
LCD screen is limited. The viewing angle can be
increased, however, by using [Brightness] to
adjust the black density of the video. When using
for the first time, adjust the black density in
accordance with the viewing angle to adjust for
clear viewing. [Dimmer] can also be used to
adjust the brightness of the LCD screen itself to
suit your personal preference.
Notes for Internal Memory
Before removing the vehicle bat-
tery
If the battery is disconnected or discharged, the
memory will be erased and must be repro-
grammed.
➲ For details, refer to "Returning the Navigation
System to the Default or Factory Settings" in
the Operation Manual.
Resetting the microprocessor
Pressing the RESET button mainly clears the
settings for the AV source without clearing
all the items of navigation functions. Please
see section "Returning the Navigation Sys-
tem to the Default or Factory Settings" of the
Operation Manual before clearing.
Pressing the RESET button lets you reset the
microprocessor to its initial settings without
changing the condition memory.
➲ Condition Memory ➞ Page 18
The microprocessor must be reset under the fol-
lowing conditions:
— Prior to using this navigation system for the
first time after installation.
— If the product fails to operate properly.
— If there appear to be problems with the
operation of the system.
— When changing the combination of equip-
ment.
— When adding/removing additional products
that connect to the navigation system.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip or
other pointed instrument.
RESET button
❒ If you have connected other equipment (for
example, a TV tuner) to this navigation system,
be sure to reset that equipment, too.
9