Pioneer DEH P4800MP Manuale operativo - Pagina 14

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore per auto Pioneer DEH P4800MP. Pioneer DEH P4800MP 36. Multi-cd control high power cd/mp3/wma player with rds tuner

Stampa la pagina

MAN-DEH-P4800MP-GB.fm Page 14 Thursday, September 29, 2005 11:55 AM

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a CD with your built-in CD player. More

advanced CD operation is explained starting on this page.

Track number indicator

Shows the track currently playing.

Play time indicator

Shows the elapsed playing time of

the current track.

1. Insert a CD into the CD loading slot.

Playback will automatically start.

• You can eject a CD by pressing EJECT.

• To avoid a malfunction, make sure that no metal object comes into contact with the

terminals when the front panel is open.

2. Use VOLUME to adjust the sound level.

Rotate it to increase or decrease the volume.

3. To perform fast forward or reverse, press and hold 4 or 6.

• If you select ROUGH, pressing and holding 4 or 6 enables you to search every 10

tracks in the current disc. (Refer to "Selecting the search method" on page 15.)

4. To skip back or forward to another track, press 4 or 6.

Pressing 6 skips to the start of the next track. Pressing 4 once skips to the start of the

current track. Pressing again will skip to the previous track.

Notes

• The built-in CD player plays one standard, 12-cm or 8-cm CD at a time. Do not use an

adapter when playing 8-cm CDs.

• Do not insert anything other than a CD into the CD loading slot.

• If you cannot insert a disc completely or if after you insert a disc the disc does not play, check

that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for

damage before inserting it again.

• If an error message such as ERROR-11 is displayed, refer to "Understanding built-in CD

player error messages" on page 31.

• When a CD TEXT disc is inserted, the disc and track titles begin to scroll to the left

automatically.

Introduction of advanced built-in CD player operation

Function display

Shows the function status.

RPT indicator

Shows when repeat play is turned

on.

* Press FUNCTION to display the

function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) –

COMP (compression and BMX) – FF/REV (search method)

• To return to the playback display, press BAND.

Note

• If you do not operate the function within about 30 seconds, the display is automatically

returned to the playback display.

Repeating play

Repeat play lets you hear the same track or disc over again.

1. Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

2. Press 4 or 6 to select the repeat range.

This switches you to the selected setting.

• DSC – Repeat the current disc

• TRK – Repeat just the current track

Note

• If you perform track search or fast forward/reverse during TRK, the repeat play range

changes to DSC.