Pioneer DEH-1300MP Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore per auto Pioneer DEH-1300MP. Pioneer DEH-1300MP 21. Cd receiver, autoradio cd, radio cd
Anche per Pioneer DEH-1300MP: Manuale d'uso (28 pagine)

Stampa la pagina

Section

Operating this unit

Removing the front panel to protect your unit from

theft

1 Press the detach button to release the front

panel.

2 Push the front panel upward and pull it toward

you.

3 Always keep the detached front panel in a protec-

tion device such as a protection case.

Re-attaching the front panel

1 Slide the front panel to the left.

Make sure to insert the tabs on the left side of the

head unit into the slots on the front panel.

2 Press the right side of the front panel until it is

firmly seated.

If you cannot attach the front panel to the head

unit successfully, make sure that you are placing

the front panel onto the head unit correctly. For-

cing the front panel into place may result in da-

mage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press SRC/OFF and hold until the unit turns off.

Selecting a source

1 Press SRC/OFF to cycle through the sources

listed below:

TUNER (tuner)—CD (built-in CD player)—AUX

(AUX)

Adjusting the volume

1 Turn SRC/OFF to adjust volume.

CAUTION

For safety reasons, park your vehicle when remov-

ing the front panel.

Note

When this unit's blue/white lead is connected to

the vehicle's auto-antenna relay control terminal,

the vehicle's antenna extends when this unit's

source is turned on. To retract the antenna, turn

the source off.

Menu operations identical

for function settings/audio

adjustments/initial settings

Returning to the ordinary display

Canceling the initial setting menu

! Press B (BAND/ESC).

You can also cancel initial settings by holding

down SRC/OFF until the unit turns off.

Tuner

Basic Operations

Selecting a band

1 Press B (BAND/ESC) until the desired band (F1,

F2, F3 for FM or AM) is displayed.

Manual tuning (step by step)

1 Press c or d.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c

or d.

While pressing and holding c or d, you can skip

stations. Seek tuning starts as soon as you re-

lease c or d.

Storing and recalling stations

for each band

% When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

Stored radio station frequency can be recalled

by pressing the preset tuning button.

# Press a or b to recall radio station frequen-

cies.