Pioneer DEH-3300UB Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore per auto Pioneer DEH-3300UB. Pioneer DEH-3300UB 49. Cd rds receiver
Anche per Pioneer DEH-3300UB: Manuale d'uso (17 pagine)

Stampa la pagina

Section

Operating this unit

SLA (source level adjustment)

SLA (Source Level Adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

! The AM volume level can also be adjusted with

this function.

! When selecting FM as the source, you cannot

switch to SLA.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Initial Settings

Press S (SRC/OFF) and hold until the

unit turns off.

Press M.C. and hold until function name

appears in the display.

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock dis-

play you wish to set.

Hour—Minute

3 Turn M.C. to adjust the clock.

AUX (auxiliary input)

Activate this setting when using an auxiliary device

connected to this unit.

1 Press M.C. to turn AUX on or off.

USB (plug and play)

This setting allows you to switch your source to USB/

iPod automatically.

1 Press M.C. to turn the plug and play function on

or off.

ON – When a USB storage device/iPod is con-

nected, depending on the type of device, the

source is automatically switched to USB/iPod

when you turn on the engine. If you disconnect

your USB storage device/iPod, this unit's source

is turned off.

OFF – When a USB storage device/iPod is con-

nected, the source is not switched to USB/iPod

automatically. Please change the source to USB/

iPod manually.

SW CONTROL (rear output and subwoofer setting)

The rear speaker leads output and RCA output can be

used for full-range speaker or subwoofer connection.

If you switch to REAR-SP :SW, you can connect a rear

speaker lead directly to a subwoofer without using an

auxiliary amp.

Initially, REAR-SP is set for rear full-range speaker

connection (FUL).

1 Press M.C. to display the setting mode.

2 Turn M.C. to change the output and press to se-

lect.

REAR-SP—PREOUT

3 Turn M.C. to change the setting.

REAR-SP: FUL—SW

PREOUT: SW—REA

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to SUBWOOFER1 (subwoofer on/off

setting) on the previous page).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

DEMO (demo display setting)

1 Press M.C. to turn the demo display on or off.

SCROLL (scroll mode setting)

When ever scroll is set to ON, recorded text informa-

tion scrolls continuously in the display. Set to OFF if

you prefer the information to scroll just once.

1 Press M.C. to turn the ever scroll on or off.

Selecting the illumination

color

(Function of DEH-4300UB)

Operating this unit

This unit is equipped with multiple-color illu-

mination. You can select a desired color from

the color list.

Direct selection from the

illumination color list

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select ILLUMI.

Turn M.C. to select the illumination

color.

You can select one option from the following

list.

! 30 preset colors (WHITE to ROSE)

! SCAN (cycle through all colors)

! CUSTOM (customized illumination color)

Press M.C. to confirm the selection.

Notes

! When SCAN is selected, the illuminated color

automatically cycles through the 30 preset

colors.

! When CUSTOM is selected, the customized

color saved is selected.

Customizing the illumination color

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select ILLUMI.

Turn M.C. to select the preset color or

CUSTOM illumination color.

# You cannot create a custom illumination color

when SCAN is selected.

Press M.C. and hold until the customiz-

ing illumination color setting appears in

the display.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 10 for all three

of R (red), G (green), and B (blue) at the same

time.

# You can also perform the same operation on

other colors.

Press M.C. and hold until CUSTOM ap-

pears.

Using an AUX source

Insert the stereo mini plug into the

AUX input jack.

Press S (SRC/OFF) to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on the previous page.

Turning the clock display

on or off

% Press

to turn the clock display on or

off.

# The clock display disappears temporarily

when you perform other operations, but the clock

display appears again after 25 seconds.

Section