Pioneer DEH-44HD Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore per auto Pioneer DEH-44HD. Pioneer DEH-44HD 41. Cd rds receiver

Stampa la pagina

Section

Operating this unit

Display indication

Indicator

State

! Tuner: band and frequency

Main dis-

! Built-in CD, USB storage

play sec-

device and iPod: elapsed

tion

playback time and text in-

formation

The list function is being oper-

(list)

ated.

(iPod

This unit's iPod function is op-

control)

erated from your iPod.

LOC

Local seek tuning is on.

(re-

Track or folder repeat is on.

peat)

Random play is on.

(ran-

The iPod source is selected

dom/shuf-

and the shuffle or shuffle all

fle)

function is on.

The sound retriever function is

(sound re-

on.

triever)

Set up menu

When you turn the ignition switch to ON after in-

stallation, set up menu appears on the display.

You can set up the menu options below.

After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

Turn M.C. to switch to YES. Press M.C. to

select.

# If you do not operate for 30 seconds, the set up

menu will not be displayed.

# If you prefer not to set up at this time, turn M.C.

to switch to NO. Press to select.

If you select NO, you cannot set up in the set up

menu.

Perform the following procedures to set

the menu.

To proceed to the next menu option, you need to

confirm your selection.

CLOCK SET (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

DEMO (demo display setting)

1 Turn M.C. to set the demo display to on or off.

2 Press M.C. to confirm the selection.

QUIT appears.

To finish your settings, turn M.C. to select

YES. Press to select.

# If you prefer to change your setting again, turn

M.C. to switch to NO. Press to select.

Notes

! You can set up the menu options in the initial

settings. For details about the settings, refer

to Initial settings on page 9.

! You can cancel set up menu by pressing

SRC/OFF.

Operating this unit

Basic operations

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight

and high temperatures.

! To avoid damaging the device or vehicle inte-

rior, remove any cables and devices attached

to the front panel before detaching it.

Removing the front panel to protect your unit from

theft

1 Press the detach button to release the front

panel.

2 Push the front panel upward (M) and then pull

it toward (N) you.

3 Always keep the detached front panel in a pro-

tection device such as a protection case.

Re-attaching the front panel

1 Slide the front panel to the left.

Make sure to insert the tabs on the left side of

the head unit into the slots on the front panel.

2 Press the right side of the front panel until it is

firmly seated.

If you cannot attach the front panel to the

head unit successfully, make sure that you are

placing the front panel onto the head unit cor-

rectly. Forcing the front panel into place may

result in damage to the front panel or head

unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press and hold SRC/OFF until the unit turns

off.