Pioneer DEH-5250SD Manuale operativo - Pagina 13

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore per auto Pioneer DEH-5250SD. Pioneer DEH-5250SD 25. Cd receiver
Anche per Pioneer DEH-5250SD: Manuale di installazione (8 pagine)

Stampa la pagina

1. Specifications

Operating this unit

Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

Fader/Balance (fader/balance adjustment)

1 Push M.C. up or down to adjust front/rear speaker

balance.

F15 to R15 is displayed as the front/rear speaker

balance moves from front to rear.

! F/R 0 is the proper setting when only two

speakers are used.

! When the rear output setting is Rear SP :S/W,

you cannot adjust front/rear speaker balance.

Refer to S/W control (rear output and subwoo-

fer setting) on page 15.

2 Push M.C. left or right to adjust left/right speaker

balance.

L15 to R15 is displayed as the left/right speaker

balance moves from left to right.

Powerful (equalizer recall)

1 Push M.C. left or right to select an equalizer

curve.

Powerful Natural Vocal Custom1 Cus-

tom2 Flat Super bass

! When Flat is selected no adjustments are

made to the sound.

100 Hz (equalizer adjustment)

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are memorized in Custom1 or Custom2.

! A separate Custom1 curve can be created for

each source. If you make adjustments when a

curve other than Custom2 is selected, the equali-

zer curve settings will be memorized in Custom1.

! A Custom2 curve can be created common to all

sources. If you make adjustments when the Cus-

tom2 curve is selected, the Custom2 curve will

be updated.

1 Recall the equalizer curve you want to adjust.

2 Push M.C. left or right to select the equalizer

band to adjust.

100Hz 315Hz 1.25kHz 3.15kHz 8kHz

3 Push M.C. up or down to adjust the equalizer

curve.

+6 to –6 is displayed as the equalizer curve is in-

creased or decreased.

LOUD (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to turn loudness on or off.

2 Push M.C. left or right to select the desired set-

ting.

Low (low) Mid (mid) High (high) OFF (off)

Sub W.1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output which

can be turned on or off.

1 Press M.C. to turn subwoofer output on or off.

2 Push M.C. left or right to select the phase of sub-

woofer output.

Push M.C. left to select reverse phase and Re-

verse appears in the display. Push M.C. right to

select normal phase and Normal appears in the

display.

Sub W.2 (subwoofer adjustment)

When the subwoofer output is on, you can adjust the

cut-off frequency and the output level of the subwoo-

fer.

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Push M.C. left or right to select cut-off frequency.

50Hz 63Hz 80Hz 100Hz 125Hz

2 Push M.C. up or down to adjust the output level

of the subwoofer.

Each time M.C. is pushed up or down, subwoofer

level increases or decreases. +6 to -24 is dis-

played as the level is increased or decreased.

Bass (bass boost)

1 Push M.C. up or down to select a desired level.

0 to +6 is displayed as the level is increased or de-

creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo-

fer output frequency range to play from the front or

rear speakers, turn on the HPF (high pass filter). Only

frequencies higher than those in the selected range

are output from the front or rear speakers.

1 Press M.C. to turn high pass filter on or off.

2 Push M.C. left or right to select cut-off frequency.

50Hz 63Hz 80Hz 100Hz 125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The AM volume level can also be adjusted with

source level adjustments.

1 Push M.C. up or down to adjust the source vo-

lume.

Adjustment range: +4 to –4

Section