Pioneer DEH-6200BT Manuale operativo - Pagina 20

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore per auto Pioneer DEH-6200BT. Pioneer DEH-6200BT 32. Cd rds receiver

Stampa la pagina

Section

Operating this unit

The unit can automatically search for a different sta-

tion with the same programming, even during preset

recall.

1 Press M.C. to turn Auto PI seek on or off.

Warning (warning tone setting)

If the front panel is not detached from the head unit

within four seconds of turning off the ignition, a warn-

ing tone sounds. You can turn off the warning tone.

1 Press M.C. to turn the warning tone on or off.

AUX (auxiliary input)

Activate this setting when using an auxiliary device

connected to this unit.

1 Press M.C. to turn auxiliary setting on or off.

USB PnP (plug and play)

This setting allows you to switch your source to USB/

USB-iPod automatically.

1 Press M.C. to turn the plug and play on or off.

! ON – When USB storage device/iPod is con-

nected, the source is automatically switched

to USB/USB-iPod. If you disconnect your USB

storage device/iPod, this unit's source is

turned off.

! OFF – When USB storage device/iPod is con-

nected, the source is not switched to USB/

USB-iPod automatically. Please change the

source to USB/USB-iPod manually.

Brightness (display brightness setting)

1 Press M.C. to display the setting mode.

2 Turn M.C. to switch the brightness setting.

High (high)—Low (low)

3 Press M.C. to confirm the selection.

SW control (rear output and subwoofer setting)

The rear speaker leads output (Rear SP:) and RCA

output (Preout:) of this unit can be used for full-

range speaker (Rear SP: :Full/Preout: :Rear) or sub-

woofer (Rear SP: :SUBW/Preout: :SUBW) connection.

If you switch to Rear SP: :SUBW, you can connect a

rear speaker lead directly to a subwoofer without

using an auxiliary amp.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between as following:

Rear SP:/Preout:—Full (SUBW)/SUBW(Rear)

3 Turn M.C. to change the setting.

Rear SP:: Full—SUBW

Preout:: SUBW—Rear

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to SW setting 1 (subwoofer on/off

setting) on page 18).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

DEMO (demo display setting)

1 Press M.C. to turn the demo display on or off.

! You can also turn on or off feature demo by

pressing

/DISP/SCRL while this unit is

turned off. For more details, refer to Demo

mode on page 3.

Ever SCRL (scroll mode setting)

When Ever Scroll is set to ON, recorded text informa-

tion scrolls continuously in the display. Set to OFF if

you prefer the information to scroll just once.

1 Press M.C. to turn the ever scroll on or off.

PowerSave (power save)

Switching this function on enables you to reduce the

consumption of battery power.

Turning on the source is the only operation allowed

when this function is on.

! When this function is on, operations are limited

as follows:

! Disc cannot be ejected after this unit is turned

off.

! This unit's phone function cannot be operated

after this unit is turned off.

! Demonstration is turned off.

1 Press M.C. to turn the power save on or off.

BT clear (resetting the Bluetooth wireless technology

module)