Pioneer DEH-80PRS Series Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Ricevitore per auto Pioneer DEH-80PRS Series. Pioneer DEH-80PRS Series 49. Cd rds receiver
Anche per Pioneer DEH-80PRS Series: Manuale di installazione (21 pagine), Manuale di installazione (37 pagine), Manuale di installazione (25 pagine)

Stampa la pagina

Pioneer DEH-80PRS Series Manuale di installazione

Installation

# Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

or other malfunctions.

DIN Rear-mount

Determine the appropriate position

where the holes on the bracket and the side

of the unit match.

Tighten two screws on each side.

1 Tapping screw (5 mm × 8 mm)

2 Mounting bracket

3 Dashboard or console

Removing the unit

Remove the trim ring.

1 Trim ring

2 Notched tab

! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

Press the detach button and push the front

panel upward and pull it toward you.

For details, refer to operation manual.

Installing the microphone

CAUTION

It is extremely dangerous to allow the micro-

phone lead to become wound around the steer-

ing column or shift lever. Be sure to install the

unit in such a way that it will not obstruct driv-

ing.

Note

Install the microphone in a position and orienta-

tion that will enable it to pick up the voice of the

person operating the system.

When installing the

microphone on the sun visor

Install the microphone on the micro-

phone clip.

1 Microphone

2 Microphone clip

Install the microphone clip on the sun

visor.

With the sun visor up, install the microphone

clip. (Lowering the sun visor reduces the voice

recognition rate.)

1 Microphone clip

2 Clamp

When installing the

microphone on the steering

column

Install the microphone on the micro-

phone clip.

1 Microphone

2 Microphone base

3 Microphone clip

4 Fit the microphone lead into the groove.

# Microphone can be installed without using mi-

crophone clip. In this case, detach the microphone

base from the microphone clip. To detach the micro-

phone base from the microphone clip, slide the mi-

crophone base.

Section