Pioneer MVH-X580BS Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore per auto Pioneer MVH-X580BS. Pioneer MVH-X580BS 33.

Stampa la pagina
Pioneer MVH-X580BS Manuale d'uso
TuneStart™
Automatically start songs from the beginning when you tune to one of your preset
music channels stored on the current band of presets. For details, refer to TUNE START on
page 20.
NOTE
TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneScan™
Scan through short previews of songs you may have missed on music channels stored
on the current band of presets.
Each song in the current channel plays for six seconds at a time.
For details, refer to TUNE SCAN (scanning the songs) on page 20.
NOTE
TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneMix™
Create a music channel that's a blend of songs made up from the music channels stored
on the current band of presets. For details, refer to TUNEMIX on page 20.
NOTE
TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or
SXV100.
Preparing for the SiriusXM Satellite Radio service
1
Press SRC/OFF to select [SIRIUSXM].
2
Press
/
to select Channel 0.
The Radio ID appears on the display.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle
Tuner.
NOTE
The Radio ID does not include the letters I, O, S or F.
3
Activate the SiriusXM service online.
For US Subscriptions:
• Visit siriusxm
4
[SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect
Vehicle Tuner has been subscribed successfully.
Press any key to clear the activation message.
NOTE
The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some
cases. Do not turn off the unit until you clear the activation message in step 4.
Listening to a channel
1
Press and hold DISP, then select [CHANNEL].
You can also select the operation mode by the SiriusXM settings (page 20).
2
Press SRC/OFF to select [SIRIUSXM].
3
Press BAND/
to select a band from [SXM1], [SXM2] or [SXM3].
4
Press
/
to select a channel.
Pressing and holding either button will rapidly browse through the channels.
Press and hold either button then release to tune automatically. Scanning stops
when the unit receives a channel. To cancel seek tuning, press
Basic operations
1
Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY].
NOTE
You can exit the replay mode by pressing and holding BAND/
Purpose
Select a channel
Skip backward/forward
Fast forward or reverse
NOTE
You can also make various adjustments in the SiriusXM settings (page 20).
Category scan
The live broadcast for each channel in the current category plays for six seconds at a
time. Follow the instructions below.
/
.
.
Operation
1 Set the operation mode to [CHANNEL].
2 Press
or
.
Pressing and holding either button will
rapidly browse through the channels.
1 Set the operation mode to [REPLAY].
2 Press
or
.
1 Set the operation mode to [REPLAY].
2 Press and hold
or
.
15
En