Pioneer SUPER TUNER III KEH-5252 Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore per auto Pioneer SUPER TUNER III KEH-5252. Pioneer SUPER TUNER III KEH-5252 21. Cassette car stereo with fm/am electronic tuner
Stampa la pagina• Local Station Switch
Pressing this switch lowers the seek tuning reception sensitivity so
that only stronger signals can be tuned in. This feature is convenient
when driving through areas that have numerous radio stations.
When this switch is depressed, the local indicator will be illuminated
on the display.
• Fader Control
This control Is used to adjust the balance between the front and rear
speakers when using a 4-speaker system. Turning the control up
wards decreases the volume of the rear speakers, while turning it
downwards decreases the volume of the front speakers. With
2-speaker systems, set this control to a horizontal position.
Important
When a power amp {sold separately) is connected to a 2-speaker high-power sys
tem, for a 4-speaker effect, the fader control cannot be used to control the speaker
output of this unit
• Loudness Switch (KEH-9292, KEH-7272)
When playing back a tape or listening to the radio at low volume,
the low and high tones are emphasized and more clearly heard by
pressing this switch.
• Auto-Loudness (KEH-5252)
When playing back a tape or listening to the radio at low volume,
the low tone is automatically emphasized.
• Clock Switch
Each press causes the display to switch between clock and frequen
cy.
Seek Tuning
Press the seek button, and tuning to the next higher or lower broad
cast on the band can be accomplished automatically by simply turn
ing the tuning knob to the left or right. FM frequencies change in 0.2
MHz steps while those in the AM band change in 10 kHz steps.
Preset Tuning
Pressing the preset button instantly tunes in the frequency pro
grammed in the memory for that button.
Manual Tuning
When manual tuning is employed, FM frequencies change in 0.2
MHz steps while AM frequencies change in 10 kHz steps.
1. Press the seek button and the seek tuning indicator will disap
pear from the display.
2. Change the frequency by turning the tuning knob to the left or
right. Turning the knob once will change the frequency one step
(see above). Holding the tuning knob in either direction will suc
cessively change the frequency at the prescribed step.