Pioneer Super Tuner IIID DEH-P6200BT Manuale operativo - Pagina 42
Sfoglia online o scarica il pdf Manuale operativo per Ricevitore per auto Pioneer Super Tuner IIID DEH-P6200BT. Pioneer Super Tuner IIID DEH-P6200BT 49. Cd receiver
Anche per Pioneer Super Tuner IIID DEH-P6200BT: Manuale di installazione (8 pagine)
Stampa la pagina
Installation
Note
• Check all connections and systems before final
installation.
• Do not use unauthorized parts. The use of
unauthorized parts may cause malfunctions.
• Consult with your dealer if installation requires
drilling of holes or other modifications of the
vehicle.
• Do not install this unit where:
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result of
a sudden stop.
• The semiconductor laser will be damaged if it
overheats. Install this unit away from hot places
such as near the heater outlet.
• Optimum performance is obtained when the unit
is installed at an angle of less than 60°.
• When installing, to ensure proper heat dispersal
when using this unit, make sure you leave ample
space behind the rear panel and wrap any loose
cables so they are not blocking the vents.
Leave ample space
DIN Front/Rear-mount
This unit can be properly installed either from
"Front" (conventional DIN Front-mount) or
"Rear" (DIN Rear-mount installation, utilizing
threaded screw holes at the sides of unit
chassis). For details, refer to the following
installation methods.
60°
Dashboard
10 cm
10 cm
DIN Front-mount
1. Insert the mounting sleeve into the
dashboard.
• When installing in a shallow space, use a
supplied mounting sleeve. If there is enough
space behind the unit, use factory supplied
mounting sleeve.
2. Secure the mounting sleeve by
using a screwdriver to bend the
metal tabs (90°) into place.
Dashboard
182
53
3. Install the unit as illustrated.
• Use commercially available parts when
installing.
Screw
Screw (M4 8)
• Make sure that the unit is installed securely
in place. Unstable installation may cause this
unit to malfunction, such as sound skip.
DIN Rear-mount
1. Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
English
Mounting sleeve
Nut
Firewall or
metal support
Metal strap