Pioneer DEH-S1190UB Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore Pioneer DEH-S1190UB. Pioneer DEH-S1190UB 16.

Stampa la pagina

AUDIO settings

Menu Item

FADER*1

BALANCE

EQ SETTING

[SUPER BASS], [POWERFUL],

[DYNAMIC], [TODOROKI],

[VOCAL], [VIVID], [CUSTOM1],

[CUSTOM2], [FLAT]

Select an equalizer band and

level for further customizing.

Equalizer band: [80HZ], [250HZ],

[800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

LOUDNESS

[OFF], [LOW], [MID], [HI]

SUB.W*2

[NOR], [REV], [OFF]

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

BASS BOOST

[0] to [+6]

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Slope level: [–12], [–24]

SLA

[+4] to [–4]

Description

Adjust the front and rear speaker balance.

Adjust the left and right speaker balance.

Select or customize the equalizer curve.

[CUSTOM1] can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

[CUSTOM2] is a shared setting used for all

sources.

You can also switch the equalizer by pressing

repeatedly.

Compensate for clear sound at low volume.

Select the subwoofer phase.

Only frequencies lower than those in the

selected range are output from the subwoofer.

Select the bass boost level.

Only frequencies higher than the high-pass filter

(HPF) cutoff are output from the speakers.

Adjust the volume level for each source except

FM.

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.

Menu Item

CLOCK SET

12H/24H

[12H], [24H]

SCROLL SET

[ONCE], [LOOP], [OFF]

AUTO PI

[ON], [OFF]

AUX

[ON], [OFF]

ANDROID WIRED

[MEMORY], [APP CONTROL]

P.APP AUTO ON

[ON], [OFF]

S.REMOTE*1*2

[OFF], [PIONEER], [PRESET]

USB AUTO

[ON], [OFF]

Description

Set the clock (page 4).

Select the time notation.

Select the way to scroll the text in the display

window.

Search for a different station with the same

programming, even if using a preset station.

Set to [ON] when using an auxiliary device

connected to the unit.

Select the appropriate connection method for an

Android device.

Select [ON] to automatically launch Pioneer ARC

APP when an Android device is connected to the

unit via AOA. (Not available when [MEMORY] is

selected in [ANDROID WIRED].)

Select [PIONEER] or [PRESET] according to your

wired remote control.

Select [ON] to automatically switch to [USB]

source when a USB device is connected to the

unit.

Select [OFF] when a USB device is being

connected to the unit just for charging.