Pioneer DVH-875AVBT Manuale operativo - Pagina 27

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore Pioneer DVH-875AVBT. Pioneer DVH-875AVBT 36.

Installation

2 Carefully unsnap the plastic frame from

the front of the new unit chassis. Remove

and discard the frame.

3 Remove the factory mounting brackets

and hardware from the existing unit

and attach them to the new unit. Do not

exceed M5 x 6mm maximum screw size.

Longer screws may damage components

inside the chassis.

4 Wire the new unit as outlined in the

Mounting Sleeve Installation instructions.

5 Mount the new unit assembly to the

dashboard or center console using the

reverse procedure of step 1.

Fuse

When replacing a fuse, make sure the new

fuse is the correct type and amperage.

Using an incorrect fuse could damage the

radio.

When wiring is complete, reconnect the

battery negative terminal.

1 Remove the panel (Reference page 9).

2 Remove the trim ring by firmly grasping

one side and pulling.

3 Insert the removal keys straight back

until they lock, then pull the radio out.

If the removal keys are inserted at an

angle, they will not lock properly and will

not release the unit.

Section