Pioneer VSX-330-K Manuale di istruzioni per l'uso - Pagina 25
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ricevitore Pioneer VSX-330-K. Pioneer VSX-330-K 36.
Anche per Pioneer VSX-330-K: Manuale di avvio rapido (25 pagine)
Stampa la pagina
4
4
3
/
Use
to set it as necessary.
See the table below for the options available for each
setting.
4
RETURN
Press
to confirm and exit the menu.
Setting/What it does
S.DELAY (Sound Delay)
Some monitors have a slight delay when
showing video, so the soundtrack will be
slightly out of sync with the picture. By adding
a bit of delay, you can adjust the sound to
match the presentation of the video.
a
MIDNIGHT/LOUDNESS
The MIDNIGHT allows you to hear effective
surround sound of movies at low volumes.
The LOUDNESS is used to get good bass and
treble from music sources at low volumes.
S.RTV (Sound Retriever)
b
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
d
DUAL MONO
Specifies how dual mono encoded Dolby
Digital soundtracks should be played.
F.PCM (Fixed PCM)
This is useful if you find there is a slight delay
before OFF recognizes the PCM signal on a
CD, for instance.
When ON is selected, noise may be output
during playback of non-PCM sources. Please
select another input signal if this is a problem.
Setting/What it does
DRC (Dynamic Range Control)
Adjusts the level of dynamic range for movie
soundtracks optimized for Dolby Digital, DTS,
Dolby Digital Plus, Dolby TrueHD, DTS-HD
and DTS-HD Master Audio (you may need to
Option(s)
use this feature when listening to surround
sound at low volumes).
0 ms to 500 ms
(1 step : 5 ms)
LFE ATT (LFE Attenuate)
Default: 0
Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.
M/L OFF
The LFE is not limited when set to 0 dB, which
MIDNIGHT
is the recommended value. When set to
–15 dB, the LFE is limited by the respective
LOUDNESS
degree. When OFF is selected, no sound is
output from the LFE channel.
c
OFF
SACD G. (SACD Gain)
ON
Brings out detail in SACDs by maximizing the
dynamic range (during digital processing).
HDMI (HDMI Audio)
Specifies the routing of the HDMI audio signal
out of this receiver (AMP) or through to a TV
(THRU). When THRU is selected, no sound is
output from this receiver.
CH1 – Channel 1
A.DLY (Auto Delay)
is heard only
This feature automatically corrects the audio-
to-video delay between components
CH2 – Channel 2
connected with an HDMI cable. The audio
is heard only
delay time is set depending on the operational
CH1 CH2 – Both
status of the display connected with an HDMI
channels heard
cable. The video delay time is automatically
from front
adjusted according to the audio delay time.
speakers
C.WIDTH (Center Width)
OFF
(Applicable only when using a center speaker)
ON
Spreads the center channel between the front
right and left speakers, making it sound wider
(higher settings) or narrower (lower settings).
Option(s)
e
AUTO
MAX
MID
OFF
0 (0 dB)
5 (–5 dB)
10 (–10 dB)
15 (–15 dB)
20 (–20 dB)
** (OFF)
0 (0 dB)
f
+6 (+6 dB)
AMP
THRU
g
OFF
ON
0 to 7
h
Default: 3
25
Listening to your system
Setting/What it does
DIMEN (Dimension)
h
Adjusts the surround sound balance from
front to back, making the sound more distant
(minus settings), or more forward (positive
settings).
PNRM. (Panorama)
h
Extends the front stereo image to include
surround speakers for a 'wraparound' effect.
i
C.IMG (Center Image)
(Applicable only when using a center speaker)
Adjust the center image to create a wider
stereo effect with vocals. Adjust the effect
from 0 (all center channel sent to front right
and left speakers) to 10 (center channel sent
to the center speaker only).
You can change the MIDNIGHT/LOUDNESS options at any
a.
time by using
MIDNIGHT
button.
You can change the Sound Retriever feature at any time by
b.
using
S.RETRIEVER
button.
The default setting when the USB input is selected is ON.
c.
This setting works only with dual mono encoded Dolby Digital
d.
and DTS soundtracks.
The initial set AUTO is only available for Dolby TrueHD signals.
e.
Select MAX or MID for signals other than Dolby TrueHD.
You shouldn't have any problems using this with most SACD
f.
discs, but if the sound distorts, it is best to switch the gain
setting back to 0 dB.
This feature is only available when the connected display
g.
supports the automatic audio/video synchronizing capability
('lip-sync') for HDMI. If you find the automatically set delay time
unsuitable, set A.DLY to OFF and adjust the delay time
manually. For more details about the lip-sync feature of your
display, contact the manufacturer directly.
Only available with 2-channel sources in DOLBY PLII MUSIC
h.
mode.
Only when listening to 2-channel sources in NEO:6 CINEMA
i.
and NEO:6 MUSIC mode.
4
Option(s)
–3 to +3
Default: 0
6
OFF
31
ON
0 to 10
Default: 3
(NEO:6 MUSIC),
10 (NEO:6
CINEMA)