Pioneer VSX-C502-S Istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per l'uso per Ricevitore Pioneer VSX-C502-S. Pioneer VSX-C502-S 49. Audio/video multi-channel receiver

Stampa la pagina
Quick start guide
01

Connecting your TV and DVD player

1
Connect your DVD player to the receiver.
Connect a 3-pin AV cable (not supplied) between the
audio/video outputs of your DVD player and the DVD IN
jacks of this receiver for the video and analog audio.
For digital audio, connect a coaxial digital audio cable
(not supplied) between your DVD player's coaxial digital
output and the DVD(TV/SAT) COAX jack on this
receiver.
• If your DVD player doesn't have a coaxial digital out
you can use an optical cable connected between the
optical output jack on your DVD player and the TV/
SAT(DVD) OPT1 jack on this receiver. However, you
VSX-C502

Switching on and playing a DVD

Once you switch the receiver on it will automatically
detect the speakers you have connected. Although there
are a number of more detailed settings you can make to
optimize the surround sound, you should be able to get
acceptable surround sound performance right away.
1
Switch on your TV and powered subwoofer.
Also make sure that your TV is set to the AV input you
connected the receiver to.
2
Press
RECEIVER on the remote or
ON on the front panel to switch on the receiver.
3
Press DVD on the remote or turn the INPUT
SELECTOR knob on the front panel to select the DVD
input.
4
Switch on your DVD player.
5
Load a DVD and start playback.
6
En
+
–
R
L
CENTER
R
L
SURROUND
FRONT
SURROUND
BACK
SUB
SPEAKERS
WOOFER
OUT
COAXIAL
VIDEO
L
AUDIO
OPTICAL
R
DIGITAL AUDIO OUT
DVD player
will have to reassign the input to DVD before using
for the first time. See Optical input setting on page 36
for how to do this.
• If you connect an optical digital cable, be careful
when inserting the plug not to damage the shutter
protecting the optical socket.
2
Connect your TV to the receiver.
Use a standard video cable (not supplied) to connect the
MONITOR OUT video jack on this receiver to a video
input on your TV.
3
Connect the supplied AC power cable to the AC
IN on this receiver and plug in the other end to a
power outlet.
ANTENNA
VIDEO
AM LOOP
FM UNBAL 75Ω
OUT
IN
CONTROL
IN
IN
IN
CENTER
SURROUND
FRONT
L
L
DIGITAL IN
R
R
TV/SAT
DVR/VCR
DVD
SUB WOOFER
DVD
TV/SAT
DVR/VCR
(DVD)
(TV/SAT)
AUDIO IN (5.1CH)
OPT1
OPT2
COAX
AUDIO
TV
This receiver will automatically decode Dolby Digital,
DTS, or Dolby Surround DVD-Video discs, according to
your speaker setup. In most cases, you won't have to
make changes for realistic surround sound.
Other possibilities (like listening to a CD with
multichannel surround sound) are explained in Home
theater sound on page 27.
6
Use the MASTER VOLUME control (front panel or
remote) to adjust the volume.
• Turn down your TV's volume so that you only hear
STANDBY/
sound from this system.
TWO VOLTAGE SELECTORS
AC IN
OUT
IN
MONITOR
OUT
L
220 -230V
240V
110V
120-127V
R
110V
220 -230V
VIDEO
120 -127V
240V
VIDEO