Pioneer X-HM72D-K Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per Ricevitore Pioneer X-HM72D-K. Pioneer X-HM72D-K 37.
Stampa la pagina
Connecting the speakers
Be sure to complete all connections before connecting this receiver to the AC power
source.
Right speaker
Left speaker
SPEAKERS
SUBWO
PRE O
R
L
Both speakers can be used on either the right or the left side.
Connecting a TV and playback component
Supplied WLAN
1
WLAN
ANTENNA
2
WLAN
AC IN
ANTENNA
To AC outlet
Power cord
Make sure you connect the speaker on the
right to the right (R) terminal and the speaker
on the left to the left (L) terminal. Also make
sure the positive and negative (+/–) terminals
on the receiver match those on the speakers.
You can use speakers with a nominal
impedance between 4 and 16 .
1. If not using the provided speaker wire, twist exposed
wire strands together.
2. Loosen terminal and insert exposed wire.
3. Tighten terminal.
1
2
10 mm
antenna
3
WLAN
ANTENNA
DIGITAL OUT
OPTICAL
TV
SPEAKERS
R
1
3
Supplied WLAN
antenna
1
3
/100)
WLAN
ANTENNA
WLAN
2
ANTENNA
Optical cable
(commercially
available)
LAN (10/100)
DIGITAL
IN
WLAN
OPTICAL
ANTENNA
ANTENNA
AM
LINE 1
IN
LINE 2
IN
LOOP
L
SUBWOOFER
ANTENNA
PRE OUT
FM
UNBAL
75 Ω
R
L
DAB/FM
2
AM loop antenna
3
CAUTION
• These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before touching
any uninsulated parts.
• Make sure that all the bare speaker wire
is twisted together and inserted fully into
the speaker terminal. If any of the bare
speaker wire touches the back panel it
may cause the power to cut off as a safety
measure.
Red tube
X-HM82, X-HM82D,
X-HM72 and X-HM72D
provided speaker wire
Modem
Internet
Router
LAN
3
2
Computer
LAN cable (commercially
available)
ANTENNA
X-HM82D
XC-HM82D
X-HM72D
DAB/FM
DAB/FM wire antenna
FM wire antenna
1
WAN
To LAN
port
3
En