Pioneer X-HX3000 Istruzioni per l'uso - Pagina 30

Sfoglia online o scarica il pdf Istruzioni per l'uso per Ricevitore Pioneer X-HX3000. Pioneer X-HX3000 36. Cd/receiver system

Wake-up Timer: Set playback to start at a specified time

How to set the Wake-up Timer for

daily operation

Once you have set up the Wake-up Timer at a

certain time, the timer setting remains in effect

until it is changed. The Wake-up Timer can

therefore be reset to operate the next morning

at the same time setting simply by pressing the

TIMER button, which causes "WAKE UP" to

appear in the display panel (and the TIMER

button to light). As before, the last step is to

turn off the system's power.

How to prevent the Wake-up Timer

from operating again

To do this, simply press the TIMER button so

that its lamp is no longer lit. Even after that,

you can have the Wake-up Timer restored by

pressing the TIMER button several times until

"WAKE UP" appears in the display panel.

Normal use of CD/Receiver System

after Wake-up Timer has been set

Even if the TIMER button's lamp is lit, you can

still use the CD/Receiver System as you nor-

mally would, as long as the system's power is

on.

When you are done using the system, be sure

to set up the audio source for timer-based

playback, then turn off the system's power.

How to check the Wake-up Timer

setting

While the system's power is off, press the CD/

receiver's DISPLAY button. This causes "WAKE

UP" to appear in the display panel, after which

the following information appears at one-

second intervals.

Playback start time setting = Playback end

time setting = Audio source = Volume

Finally, "END" appears, then the display panel

goes blank after a moment.