Pioneer AVH-200EX Manuale di installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione per Ricevitore stereo Pioneer AVH-200EX. Pioneer AVH-200EX 21. Dvd rds av receiver
Anche per Pioneer AVH-200EX: Manuale di installazione (8 pagine)
Stampa la pagina
Important safety
information
WARNING
Rear visibility systems (backup cameras) are
required in certain new vehicles sold in the U.S.
and Canada. U.S. regulations began according to
a two year phase-in on May 1, 2016, and both
the U.S. and Canada require that all such
vehicles manufactured on or after May 1, 2018
have rear visibility systems. Owners of vehicles
equipped with compliant rear visibility
systems should not install or use this product
in a way that alters or disables that system's
compliance with applicable regulations. If
you are unsure whether your vehicle has a rear
Connection
Precautions
Your new product and this
manual
• Do not operate this product, any
applications, or the rear view camera
option (if purchased) if doing so will
divert your attention in any way from the
safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you
experience difficulty in operating this
product or reading the display, park your
vehicle in a safe location and apply the
2
En
visibility system subject to the U.S. or Canadian
regulations, please contact the vehicle
manufacturer or dealer.
If your vehicle has a compliant backup camera
that displays the backup view through the
factory receiver, do not use the Pioneer receiver
unless it is connected to and displays the same
view as the factory backup camera. Connection
to the factory backup camera will require an
adaptor, sold separately. Not all vehicles may be
able to connect. Please check with a qualified
professional installer for installation options
specific to your vehicle.
parking brake before making the
necessary adjustments.
• Do not install this product where it may
(i) obstruct the driver's vision,
(ii) impair the performance of any of the
vehicle's operating systems of safety
features, including airbags, hazard lamp
buttons, or
(iii) impair the driver's ability to safely
operate the vehicle.
In some cases, it may not be possible to
install this product because of the vehicle
type or the shape of the vehicle interior.
Important safeguards
WARNING
Pioneer does not recommend that you
install this product yourself. This product is
designed for professional installation only.
We recommend that only authorized
Pioneer service personnel, who have
special training and experience in mobile
electronics, set up and install this product.
NEVER SERVICE THIS PRODUCT YOURSELF.
Installing or servicing this product and its
connecting cables may expose you to the
risk of electric shock or other hazards, and
can cause damage to this product that is
not covered by warranty.
Precautions before
connecting the system
WARNING
Do not take any steps to tamper with or
disable the parking brake interlock system
which is in place for your protection.
Tampering with or disabling the parking
brake interlock system could result in
serious injury or death.
CAUTION
• Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
• Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger
compartment into the engine
compartment. If the yellow lead's
insulation tears as a result of contact with
metal parts, short-circuiting can occur,
resulting in considerable danger.
• It is extremely dangerous to allow cables
to become wound around the steering
column or shift lever. Be sure to install
this product, its cables, and wiring away
in such so that they will not obstruct or
hinder driving.
• Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicle's moving parts,
especially the steering wheel, shift lever,
parking brake, sliding seat tracks, doors,
or any of the vehicle's controls.
• Do not route wires where they will be
exposed to high temperatures. If the
insulation heats up, wires may become
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
• Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse
resistor or filter, etc.) may fail to work
properly.
• Never feed power to other electronic
products by cutting the insulation of the
power supply lead of this product and
tapping into the lead. The current
capacity of the lead will be exceeded,
causing overheating.
Before installing this
product
• Use this unit with a 12-volt battery and
negative grounding only. Failure to do so
may result in a fire or malfunction.
• To avoid shorts in the electrical system,
be sure to disconnect the (–) battery
cable before installation.
To prevent damage
WARNING
• When speaker output is used by 4
channels , use speakers over 50 W