Pioneer VSX-605S Manuale di istruzioni per l'uso - Pagina 25
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ricevitore stereo Pioneer VSX-605S. Pioneer VSX-605S 37. Audio/video stereo receiver
Anche per Pioneer VSX-605S: Manuale di istruzioni per l'uso (37 pagine)
OPERATING THE TUNER (cu! operation)
-
[ S C System Control
Calling up the tuner display.
1. Press the TUNER button of the input selector.
2. Press the GUI MODE button on this unit or the GUi button
on the remote control.
TUNER operation indications are displayed.
") Channel indication:
Indicates the current channel.
<2) Frequency indication:
Indicates the current frequency.
@) «4, » buttons:
Use to raise or lower the frequency.
(4 BAND button:
Switches between FM/AM. The band changes each time you
press this button, and is displayed next to the frequency
illustration shows U.S. and Canadian models.
@) MEMORY button:
Use to memorize stations.
You can only press this button when a channel list is
displayed.
@
Channel list:
Frequencies memorized in each channel are displayed. Press
a number button, and that channel's frequency is received.
@
NEXT button:
Switches between channel lists. There are a total of thirty
indication.
channels, from 1 to 30, displayed 10 at a time on three lists
which change each time you press the button as follows.
(ee 4-10 11-20
4
21-30 et]
The band changes each time you press the ENTER button.
2. Move the cursor to » or <4, and press the ENTER button
FREQUENCY PRESETTING
@ One Step Tuning:
Press the ENTER button and release quickly. The frequency will
change by one step each time the button is pressed. Press as
many times as necessary to tune in the desired station.
® Auto Tuning:
Press the ENTER button until the frequency starts to change
(about 1 sec.}, then release it. The tuner automatically searches
for a broadcasting station and stops when one is found.
NOTE:
When the signal level is too weak for reception, the unit cannot
perform Auto tuning. In this case, change to Manual tuning.
® High Speed Manual Tuning:
Keep the ENTER
button
pressed.
The frequency changes
continuously, and stops when the button is released.
{1-10, 11-20 or 21-30)
2. Tune in the desired station.
Refer to "MANUAL/AUTO TUNING"
procedure.
In addition to station frequencies, the MPX MQDE can also
be preset (FM only).
Switch to the MPX MODE using the MPX MODE button on
this unit. (No indications are displayed.)
3. Press the MEMORY button.
Channel indications flash.
4, Select the channei you want to memorize from the
channel list.
This memorizes the frequency.
To memorize other stations, repeat steps 2 through 4 or 1
through 4.
26
<ARB7059>