Pioneer XC-L77 Istruzioni per l'uso - Pagina 40
Sfoglia online o scarica il pdf Istruzioni per l'uso per Ricevitore stereo Pioneer XC-L77. Pioneer XC-L77 48. Stereo cd receiver; speaker system; stereo cassette deck
Stampa la pagina
8 Using the Timer
Setting the Sleep Timer
After choosing one of the sleep
options, the display dims
Tip
will not be available if a CD
AUTO
or MD is playing in repeat mode
(see p.25), or if a tape is playing
in endless mode (see p.33). If you
select
, then subsequently
AUTO
start playing something in repeat
or endless mode, the sleep timer
will change automatically to the 90
minute setting.
Setting Up a Future Recording
40
When setting the sleep timer, you only have to tell the system when to switch off.
SET
AUX/CD-R
SOUND
DISPLAY
STANDBY/ ON
1
Select SLEEP TIMER from the timer menu.
Remember: switch between timer menu options using the $ and ›
buttons; select the option by pressing
2
Select a time option:
Use the $ and › buttons to switch between options, then press
$
SLEEP AUTO
90 -
SLEEP
SLEEP
plays the current CD, tape or MD out, then switches off the system.
AUTO
90, 60 and 30 options switch off the system after 90, 60 and 30 minutes,
respectively; OFF cancels the sleep timer if it was previously set.
The little moon indicator lights in the display to show the sleep timer is set and the
display dims. To check how much time is left on the sleep timer, select
from the timer menu, then press
You can set the timer to record something from either the tuner or a component
connected to the AUX/CD-R inputs. For example, you might want to record a
programme on the radio that is broadcast while you're at work. If you're recording
from an auxiliary component it must also be able to switch on at the time the
recording starts —this system can't control it —or you have to leave it switched on
until the recording has finished.
Timer recording works with either the tape deck or the optional MD recorder. During
the actual recording, the volume is automatically set to minimum.
SET
AUX/CD-R
SOUND
DISPLAY
STANDBY/ ON
TIMER
&
$
›
SET
MD
TAPE
TIMER/
! —
+ ⁄
REC
CHARACTER
CANCEL
4
.
SET
›
60 -
30 -
OFF
SLEEP
SLEEP
. The display shows the remaining time.
SET
TIMER
&
$
›
SET
MD
TAPE
TIMER/
! —
+ ⁄
REC
CHARACTER
CANCEL
4
VOL
¢
.
SET
SLEEP TIMER
VOL
¢