Pioneer CT-F10 Manuale di istruzioni per l'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Amplificatore Pioneer CT-F10. Pioneer CT-F10 40. Stereo cassette deck
Anche per Pioneer CT-F10: Manuale di servizio (28 pagine), Istruzioni operative supplementari (21 pagine), Manuale di manutenzione (28 pagine)

ANTENNA

LOOP

ANTENNA

(Illustration shows non-UK model)

There are analog audio inputs for connecting up other

components such as an MD or tape deck, or turntable (with

suitable phono amplifier). Use a standard stereo audio cable

(with RCA/phono plugs on either end) to connect the

(auxiliary inputs) on this unit to the audio out sockets on the

other component. Be sure to match the color-coded plugs and

sockets at both ends for best results.

AUX IN

After making sure that everything is properly connected, plug

in to a power outlet.

Handle the power cord by the plug part. Do not pull out the

plug by tugging the cord, and never touch the power cord

when your hands are wet, as this could cause a short circuit or

electric shock. Do not place the unit, a piece of furniture, or

other object on the power cord or pinch the cord in any other

way. Never make a knot in the cord or tie it with other cords.

The power cords should be routed so that they are not likely to

be stepped on. A damaged power cord can cause a fire or give

you an electric shock. Check the power cord once in a while. If

you find it damaged, ask your nearest Pioneer authorized

service center or your dealer for a replacement.

PLAY

OUT

For ventilation purposes, leave at least 15 cm (6 inches) of

free space at the rear of the unit, 10 cm (3.5 inches) either

side, and 20 cm (7 inches) above.