Pioneer F-Z292L Manuale di istruzioni per l'uso - Pagina 21

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Amplificatore Pioneer F-Z292L. Pioneer F-Z292L 28. Stereo double cassette tape deck amplifier

Stampa la pagina

TAPE FADER

{function for fading out recorded tapes}

With this function, it is possible to change any portion of a recorded

tape into a fade-out.

Sound fades to no-signal recording after approx,

two to three

nds and the tape stops after approx.

10 seconds.

When the tape is played back, the sound will gradually start decreas-

ing from the beginning of the faded portion, and be cut off completely

in approxirnately

1O seconds

1, Load the recorded tape into deck ft

Tape fader can not be used on deck |

2, Operate deck Il to set the tape to the beginning of the portion to

be faded out.

3. Press the FADER switch 3).

~@)} flash

4. Press the PLAY switch (Be or ~«@) i).

* The fade-out operation will start, then stop after approximately

10 seconds

NOTE:

* Hfunwanted sound remains after the fade-out, use the MUTE switch

( O/ to erase it.

* Make sure that the cassette's accidental erasure prevention tab (for

the side in use) is not broken off.

A.S.E.S.

(Auto Synchro Editing System)

(This function can be used with the Pioneer PD-272T or PD-282M CD

player when the CONTROL terminal of the CD player is connected to

that of the tuner.)

For automatic recording of a CD to a cassette tape. This unit offers three

kinds of ASES operation.

FADE:

The sound will fade out automatically at the end of the tape

PARALLEL:

Deck | and deck I record at the

same time

The sound will fade out automatically at the end of the

tape.

Hf one of the decks stops at the end of the tape, or if the

STOP switch is pressed to stop one of the decks,

then

the other deck will switch into the FADE mode, the PARA)

indicator will go aut, and the F

indicator wall ight

RELAY:

disc If after deck | finishes recording disc |

DISC 4

Deck [ _

« When

used together with the PD-282M_

recording will

continue on deck Hl after recording finishes on the tape in

deck |.

In either

, the sound will fade out automatically at the end

of the tape

Wf the STOP

switch

is pressed on deck

| while deck | is

recording, then deck I will shift to the FADE mode and begin

ASES. TheR

Vindicator will go out and thelF/ DEjindicator

jal

will light

* Recording starts from the forward (® } direction.

® During both side

recording, when the tape ends in the middle of a

song in the forward (% ) direction, it will restart from the beginning

of the song when recording continues in the reverse { ~@)} direction

1. Put discs in the CD piayer.

2. Put a tape to be recorded in deck I.

Put tapes to be recorded in both deck { and deck fl if you are going

to perform PARALLEL or RELAY recording

Set the DOLBY NR switch ) te the desired position.

Set the REVERSE MODE

switch ©? to the desired position.

To record the sound passed through the equalizer, turn on the

EQUALIZER switch and use the equalizer controls to adjust the

sound quality.

6. Press one of the ASES switches (FADE, PARALLEL, RELAY)

Faw

o a

1, BEC RELAY

When Reverse Mode Switch is at'

pay

The cassette tape for recording is rewound to the beginning.

Recording of the cassette tape begins in the forward direction.

Playback begins on the CD player.

hae

REC

PLAY

+ When Reverse Mode Switch is at"

"SS "9

7. To stop ASES operation, press the STOP switch (Mm) of the deck

currently recording.

NOTE.

* Do not attempt

to perform

manual

operations

during A.S.

operation.

SLEEP

TIMER

—— Automatically turns off power.

Use the supplied remote control unit to operate.

Power turns off auto.

matically after your

set time has elapsed.

Each time you press

the SLEEP key, the setting changes in the sequence

shown here.

+ 930

— — *

~ 30

When the WAKE

UP timer is on, the sound fades out when the SLEEP

TIMER cuts the power.

However, when the WAKE

UP timer

is off, or

when WAKE

UP 1 or WAKE

UP 2 are on and the volume setting is *,

then there ts no fadeout.