Pioneer GM-3500T Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Pioneer GM-3500T. Pioneer GM-3500T 45. Bridgeable two-channel power amplifier
Anche per Pioneer GM-3500T: Manuale d'uso (37 pagine), Manuale d'uso (14 pagine)

Stampa la pagina

Connecting the units

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied speaker

input wire.

! Do not connect both the RCA input and the

speaker input at the same time.

1 Car Stereo

2 Speaker output

3 White/black: Left *

4 White: Left +

5 Gray/black: Right *

6 Gray: Right +

7 Speaker input connector

To speaker input terminal of this unit.

Connecting the power

terminal

The use of a special red battery and ground

wire RD-223, available separately, is recom-

mended. Connect the battery wire directly to

the car battery positive terminal + and the

ground wire to the car body.

WARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

Route battery wire from engine com-

partment to the vehicle interior.

After completing all other amplifier connec-

tions, finally connect the battery wire terminal

of the amplifier to the positive (+) battery

terminal.

1 Positive (+) terminal

2 Engine compartment

3 Vehicle interior

4 Fuse (30 A) × 2

5 Insert the O-ring rubber grommet into the

vehicle body.

6 Drill a 14 mm hole into the vehicle body.

Twist the battery wire, ground wire

and system remote control wire.

Attach lugs to wire ends.

Use pliers, etc., to crimp lugs to wires.

1 Lug (sold separately)

2 Battery wire

3 Ground wire

Connect the wires to the terminal.

Fix the wires securely with the terminal

screws.

Section

Twist