Pioneer GM-6200F Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Pioneer GM-6200F. Pioneer GM-6200F 9. Bridgeable four-channel power amplifier
Anche per Pioneer GM-6200F: Manuale d'uso (14 pagine), Manuale di servizio (33 pagine)

Stampa la pagina

BRIDGEABLE FOUR-CHANNEL

POWER AMPLIFIER

AMPLIFICATEUR DE PUISSANCE

PONTABLE A QUATRE VOIES

Owner's Manual

GM-6200F

Mode d'emploi

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

Published by Pioneer Corporation.

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: 1-877-283-5901

Publication de Pioneer Corporation.

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Tous droits de reproduction et de traduction

Blvd.Manuel Avila Camacho 138 10 piso

réservés.

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

Printed in China

Imprimé en Chine

<CRD4020-B/U> UC

Specifications

Power source .............................................................................................................. 14.4 V DC (10.8 — 15.1 V allowable)

Grounding system ............................................................................................................................................ Negative type

Current consumption ...................................................................................................... 35.0 A (at continuous power, 4 Ω)

Average current drawn* .......................................................................................................... 9.0 A (4 Ω for four channels)

15.0 A (4 Ω for two channels)

Fuse .......................................................................................................................................................................... 25 A × 2

Dimensions ........................................................................................................................ 300 (W) × 61 (H) × 336 (D) mm

[12 in. (W) × 2-3/8 in. (H) × 1 ft. 1 in. (D)]

Weight ........................................................................................................ 3.9 kg (8.6 lbs.) (Leads for wiring not included)

Maximum power output .............................................................................................. 120 W × 4 ( 4 Ω) / 300 W × 2 ( 4 Ω)

Continuous power output ............................................................ 60 W × 4 (at 14.4 V, 4 Ω, 20 Hz — 20 kHz 0.2% THD)

150 W × 2 (at 14.4 V, 4 Ω, 20 Hz — 20 kHz 0.8% THD)

75 W × 4 (at 14.4 V, 2 Ω, 20 Hz — 20 kHz 0.8% THD)

Load impedance ............................................................................................................................ 4 Ω (2 — 8 Ω allowable)

(Bridge connection: 4 — 8 Ω allowable)

Frequency response .......................................................................................................... 10 Hz — 50 kHz (+0 dB, –1 dB)

Signal-to-noise ratio ........................................................................................................................ 95 dB (IHF-A network)

Distortion ............................................................................................................................................ 0.01 % (10 W, 1 kHz)

Separation ........................................................................................................................................................ 70 dB (1 kHz)

Low pass filter ................................................................................................................................ Cut off frequency: 80 Hz

Cut off slope: –12 dB/oct

High pass filter ................................................................................................................................ Cut off frequency: 80 Hz

Cut off slope: –12 dB/oct

Gain control ...................................................................................................................................... RCA: 400 mV — 6.5 V

Speaker: 1.6 — 26 V

Maximum input level / impedance ........................................................................................................ RCA: 6.5 V / 22 kΩ

Speaker: 26 V / 40 kΩ

Power output ........................................................................................ 60 W RMS × 4 channels

(4 Ω and

1 % THD+N)

150 W RMS × 2 channels

(4 Ω and

1 % THD+N)

75 W RMS × 4 channels

(2 Ω and

1 % THD+N)

Signal-to-noise ratio ............................................................ 80 dBA (Reference: 1 W into 4 Ω)

Note:

• Specifications and the design are subject to possible modification without notice

due to improvements.

*Average current drawn

• The average current drawn is nearly the maximum current drawn by this unit

when an audio signal is input. Use this value when working out total current

drawn by multiple power amplifiers.

Before Using This Product

Thank you for purchasing this PIONEER

After-sales service for Pioneer

product. It is designed to give you many

products

years of enjoyment.

PIONEER SUGGESTS USING A PRO-

FESSIONAL INSTALLER DUE TO THE

Please contact the dealer or distributor from where

COMPLEXITY OF THIS PRODUCT.

you purchased the product for its after-sales ser-

Please read all instructions and WARN-

vice (including warranty conditions) or any other

information. In case the necessary information is

INGS in this manual before attempting

not available, please contact the companies listed

operation. Should you have any questions,

below:

contact your nearest Pioneer authorized

Please do not ship your product to the companies

dealer or installation specialist.

at the addresses listed below for repair without

advance contact.

Information to User

7 U.S.A.

Alteration or modifications carried out

Pioneer Electronics (USA) Inc.

without appropriate authorization may

CUSTOMER SUPPORT DIVISION

invalidate the user's right to operate the

P.O. Box 1760

equipment.

Long Beach, CA 90801-1760

800-421-1404

Important

7 CANADA

The serial number of this amplifier is writ-

Pioneer Electronics of Canada, Inc.

ten on the bottom of the unit. For your

CUSTOMER SATISFACTION

own security and convenience, write it

DEPARTMENT

down on the enclosed warranty card. Keep

300 Allstate Parkway

the card handy for future reference.

Markham, Ontario L3R OP2

1-877-283-5901

For warranty information please see the Limited

Warranty sheet included with your product.

Product registration

Visit us at the following site:

1 Register your product. We will keep the details of

your purchase on file to help you refer to this

information in the event of an insurance claim

such as loss or theft.

2 Receive updates on the latest products and tech-

nologies.

3 Download owner's manuals, order product cata-

logues, research new products, and much more.

WARNING

CAUTION

• Handling the cord on this product or cords associ-

Never replace the fuse with one of greater

ated with accessories sold with the product will

value or rating than the original fuse. Use

expose you to lead, a chemical known to the State

of an improper fuse could result in over-

of California and other governmental entities to

cause cancer and birth defects or other reproduc-

heating and smoke and could cause dam-

tive harm. Wash hands after handling.

age to the product and injury including

• Always use the special red battery and ground

burns.

wire [RD-223], which is sold separately. Connect

the battery wire directly to the car battery positive

terminal (+) and the ground wire to the car body.

CAUTION

• Do not touch the amplifier with wet hands.

Otherwise you may get an electric shock. Also, do

Diagram A - Proper

Diagram B - Improper

not touch the amplifier when it is wet.

• For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

you can still hear normal traffic sound.

Ohm

Speaker

• Check the connections of the power supply and

speakers if the fuse of the separately sold battery

wire or the amplifier fuse blows. Detect the cause

Ohm

and solve the problem, then replace the fuse with

Speaker

another one of the same size and rating.

L+

R-

L+

R-

• To prevent malfunction of the amplifier and

speakers, the protective circuit will cut the power

Pioneer

Amplifier

supply to the amplifier (sound will stop) when an

abnormal condition occurs. In such a case, switch

4 Ohm Bridged Mode

2 Ohm Bridged Mode

the power to the system OFF and check the

connection of the power supply and speakers.

Do NOT install or use your Pioneer ampli-

Detect the cause and solve the problem.

fier by wiring speakers rated at 4 Ohm (or

• Contact the dealer if you cannot detect the cause.

lower) in parallel to achieve a 2 Ohm (or

• To prevent an electric shock or short-circuit

lower) bridged mode (Diagram B).

during connection and installation, be sure to

Amplifier damage, smoke, and overheating

disconnect the negative (–) terminal of the battery

could result from improper bridging. The

beforehand.

amplifier surface could also become hot to

• Confirm that no parts are behind the panel when

the touch and minor burns could result.

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

To properly install or use a bridged mode

such as fuel lines, brake lines and the electrical

for a two-channel amplifier and achieve a 4

Ω load, wire two 8 Ω speakers in parallel

wiring from damage.

• DO NOT allow amplifier to come into contact

with Left + and Right – (Diagram A) or

with liquids due to, for example, the location

use a single 4 Ω speaker. For a four-chan-

where the amplifier is installed. Electrical shock

nel amplifier, follow the speaker output

could result. Also, amplifier and speaker damage,

connection diagram for bridging as shown

smoke, and overheating could result from contact

on the back of your amplifier, and wire

with liquids. In addition, the amplifier surface and

two 8 Ω speakers in parallel to achieve a 4

the surface of any attached speakers could become

Ω load or use a single 4 Ω speaker per

hot to the touch and minor burns could result.

channel.

If you have any questions or concerns,

please contact your local authorized

Pioneer dealer or call Pioneer customer

service.