Pioneer GM-X404 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Pioneer GM-X404. Pioneer GM-X404 22. Bridgeable four-channel power amplifier
Anche per Pioneer GM-X404: Manuale di servizio (18 pagine), Manuale di servizio (17 pagine)

Stampa la pagina
Pioneer GM-X404 Manuale d'uso
≠
[36]
+
+
[28] [29]
+
[38]
≠
≠
L
[30]
≠
[36]
+
+
L
[31]
+
[39]
R
[18]
≠
≠
[30]
[32]
[28]
+
[36]
[29]
≠
≠
L
[30]
≠
[40]
+
+
L
[31]
+
R
[36]
[18]
≠
≠
[30]
≠
[29]
[40]
+
+
[28]
10
Two-channel mode (stereo) (Fig. 9)
[2] RCA Input Select Switch
Slide this switch to the left.
[16] Output
[32]
[17] White
[17]
[18] Red
[18]
[19] Connecting wires with RCA pin plugs
(sold separately)
[21]
R
[21] RCA output pin jacks
[33]
[28] Black cover
[29] Black stripe
[2]
[30] Green cover
INPUT SELECT
[31] Green stripe
2
CH
4
CH
[36]
[32] To RCA input pin jacks
[33] RCA input pin jack A
[36] No connection
R
L
[17]
[38] Speaker (right)
[39] Speaker (left)
[19]
Two-channel mode (mono) (Fig. 10)
[16]
Fig. 9
[2] RCA Input Select Switch
Slide this switch to the left.
[17]
[16] Output
[18]
[17] White
[18] Red
[21]
R
[19] Connecting wires with RCA pin plugs
[33]
(sold separately)
[21] RCA output pin jacks
[2]
[28] Black cover
INPUT SELECT
[29] Black stripe
2
4
CH
CH
[36]
[30] Green cover
[31] Green stripe
[32] To RCA input pin jacks
R
L
[17]
[33] RCA input pin jack A
[36] No connection
[19]
[40] Speaker (mono)
[16]
Fig. 10

Installation

CAUTION
• Do not install in:
— Places where it could injure the driver
or passengers if the vehicle stops
suddenly.
— Places where it may interfere with the
driver, such as on the floor in front of
the driver's seat.
• Make sure that wires are not caught in the
sliding mechanism of the seats, resulting
in a short-circuit.
• Confirm that no parts are behind the
panel when drilling a hole for installation
of the amplifier. Protect all cables and
important equipment such as fuel lines,
brake lines and the electrical wiring from
damage.
• Install tapping screws in such a way that
the screw tip does not touch any wire.
This is important to prevent wires from
being cut by vibration of the car, which
can result in fire.
• To ensure proper installation, use the
supplied parts in the manner specified. If
any parts other than the supplied ones
are used, they may damage internal parts
of the amplifier, or they may become
loose and the amplifier may shut down.