Pioneer GM-X562 Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Pioneer GM-X562. Pioneer GM-X562 17. Bridgeable power amplifier
Anche per Pioneer GM-X562: Manuale d'uso (8 pagine), Manuale d'uso (6 pagine)
Stampa la pagina
Specifications
Power source .............................................................................................................. 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system ............................................................................................................................................ Negative type
Current consumption ........................................................................................................ 16.4 A (at continuous power, 4 Ω)
Average current drawn* ............................................................................................................ 5.3 A (4 Ω for two channels)
Fuse .................................................................................................................................................................................. 25 A
Dimensions ........................................................................................................................ 279 (W) × 61 (H) × 237 (D) mm
Weight ........................................................................................................ 3.8 kg (8.4 lbs) (Leads for wiring not included)
Maximum power output .................................................................................................................... 130 W × 2 / 300 W × 1
Continuous power output .......................................................... 65 W × 2 (at 14.4 V, 4 Ω, 20 — 20,000 Hz, 0.08% THD)
Load impedance ............................................................................................................................ 4 Ω (2 — 8 Ω allowable)
Frequency response ............................................................................................................ 10 — 50,000 Hz (+0 dB, –1 dB)
Signal-to-noise ratio ...................................................................................................................... 100 dB (IHF–A network)
Distortion ............................................................................................................................................ 0.008% (10 W, 1 kHz)
Separation ........................................................................................................................................................ 60 dB (1 kHz)
Low pass filter ................................................................................................................................ Cut off frequency: 80 Hz
Maximum input level/impedance .................................................................................... RCA: 6.5 V/22 kΩ (0.4 — 6.5 V)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
[11 (W) × 2-3/8 (H) × 9-3/8 (D) in]
150 W × 1 (at 14.4 V, 4 Ω, 20 — 20,000 Hz, 0.8% THD)
75 W × 2 (at 14.4 V, 2 Ω, 20 — 20,000 Hz, 0.8% THD)
(Bridge connection: 4 — 8 Ω allowable)
Speaker: 26 V/40 kΩ (1.6 — 26 V)
7.4 A (4 Ω for one channel)
Cut off slope: –12 dB/oct