Ariston AVTL 89 Manuale di istruzioni per l'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavatrice Ariston AVTL 89. Ariston AVTL 89 12.

Stampa la pagina

Care and maintenance

Cutting off the water or electricity

supply

Turn off the water tap after every wash. This will

limit the wear of your appliance's water system

and also prevent leaks.

Unplug your appliance when cleaning it and

during all maintenance operations.

Cleaning your appliance

The exterior and rubber parts of your appliance can

be cleaned with a soft cloth soaked in lukewarm

soapy water. Do not use solvents or abrasives.

Cleaning the detergent dispenser

Remove the dispenser by raising it and pulling it out

(see figure).

Wash it under running water; this operation should

be repeated

frequently.

Caring for your appliance door and

drum

Always leave the appliance door ajar to prevent

unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump that does not require any maintenance.

Sometimes, small items (such as coins or buttons)

may fall into the pre-chamber that protects the

pump, situated in the lower part of the same.

Disassembly:

Press lightly on the large

button on the front of the

detergent dispenser and pull

it upwards (fig. 1).

Fig. 1

How to clean the detergent dispenser

Cleaning:

Then clean the dispenser under a tap (fig. 3) using an old

toothbrush and, once the pair of siphons inserted in the

top of compartments 1 and 2 (fig. 4) have been pulled

out, check whether the same are not clogged and then

rinse them.

Fig. 2

Make sure the wash cycle has ended and unplug

the appliance.

To recover any objects that have fallen into the pre-

chamber:

Checking the water inlet hose

Check the water inlet hose at least once a year. If

you see any cracks, replace it immediately: during

the wash cycles, water pressure is very strong and

a cracked hose could easily split open.

Never use hoses that have already been used.

Fig. 3

1. remove the plinth at

the bottom on the

front side of the

washing machine by

pulling from the side

with your hands (see

diagram); (see figure);

2. unscrew the lid

rotating it anticlock-

wise (see figure): a

little water may trickle

out. This is perfectly

normal;

3. clean the interior

thoroughly;

4. screw the lid back

on;

5. reposition the panel,

making sure the hooks

are securely in place

before you push it onto

the appliance.

Reassembly:

Do not forget to reinsert the

pair of siphons into the

special housings and then to

replace the dispenser into its

seat, clicking it into place

(fig. 4, 2 and 1).

Fig. 4