Pioneer CLD-99 Manuale di istruzioni per l'uso - Pagina 28
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lettore CD Pioneer CLD-99. Pioneer CLD-99 31. Cd cdv ld player
Stampa la pagina
WHEN PLAYING BACK A COMPACT DISC
6.Player stops immediately after
playback started.
7.No sound output.
8.Sound is distorted.
When troubles occur:
When some troubles occur during use of the player, the following display (service number) appears on the display of the player and theTV
e Disc is loaded upside down (CD, CDV, one-sided
LD discs).
eThe playing surface of the disc is dirty.
e Disc is not property set on the disc table.
e@ The stereo amplifier is not correctly connected.
eYou are not operating the stereo amplifier
correctly.
e@ The connection terminals and/or the plugs of the
connection cords are dirty.
eThe
plugs of the connection
cords
are
disconnected, or are not fully pushed in.
@The player is in pause mode.
eThe audio output jacks are connected to the
PHONO jacks.
:
@ The connection terminals and/or the plugs of the
connection cords are dirty.
e The plugs of the connection cords are not fully
pushed in.
screen. If you are in those trouble, follow the "Remedy" below.
Display window of the player
Displayed number
Condition of the player
28
<VRB1I139>
En
TV screen
A disc is not loaded correctly on the disc table. Or,
a disc is dirty.
Two discs are loaded on the disc table. Or, a disc
is dirty.
.
(The displayed number after P, F, L, E differs
depending on the condition of the player.)
The player is in abnormal condition.
(The displayed number after A differs depending
on the condition of the player.)
TROUBLESHOOTING
e@Load the disc correctly with the label side
upward.
e@Use a soft cloth and lightly wipe off the dirt
from the surface of the disc. If necessary,
moisten a cloth with diluted neutral detergent
to remove heavy dirt or fingerprints.
@ Set the disc properly.
eConnect the amplifier correctly.
e@Refer to the operating instructions for the
amplifier, and operate the amplifier correctly.
Clean the plugs and terminals and connect
again.
@ Make sure that connections are made correctly.
e@Press PLAY » and restore the player to play
mode.
e@ Connect to the AUX, CD, VDP, LD, or VCR jacks.
eClean the plugs and terminals and connect
again.
@Push the plug in firmly.
U1
Reload a disc corresponding to a disc guide on
the disc table.
Wipe the disc with a soft cloth.
Open the disc table and press » again.
Load only one disc on the disc table.
Wipe the disc with a soft cloth.
Open the disc table and press > again.
If the same service number is displayed, the
player is in abnormal condition. When requesting
service, please notify the displayed number on
the display of the player or on the TV screen (for
example, 'service number E 4').
When
requesting service, please notify the
displayed number on the display of the player or
on the TV screen (for example, 'service number
H 1').