Pioneer DEH-1750 Manuale operativo - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo per Lettore CD Pioneer DEH-1750. Pioneer DEH-1750 42. High power cd player with fm/am tuner
Anche per Pioneer DEH-1750: Manuale operativo (45 pagine)

Pioneer DEH-1750 Manuale operativo

Before You Start

About this unit

The tuner frequencies on this unit are allo-
cated for use in Central or South America. Use
in other areas may result in poor reception.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
! Keep this manual handy as a reference for op-
erating procedures and precautions.
! Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
! Protect this unit from moisture.
! If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
! If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
Important
! Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.

Removing the front panel

1
Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2
Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3
Put the front panel into the protective
case provided for safe keeping.

Attaching the front panel

1
Place the front panel flat against the
head unit.
2
Press the front panel into the face of
the head unit until it is firmly seated.
Section
01
3
En