Pioneer AVX-P7300DVD Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Lettore DVD Pioneer AVX-P7300DVD. Pioneer AVX-P7300DVD 9. Pioneer avx-p7300dvd: install guide

Pioneer AVX-P7300DVD Manuale di installazione

Connecting the Units

When Connecting the Head Unit
Connection box
(supplied with the DVD
DVD Navigation Unit
Navigation Unit)
(e.g. AVIC-9DVD)
(sold separately)
Green
To audio outputs
3 m
RCA cables
To video output
(sold separately)
RCA cables
Multi-CD player
(supplied)
(sold separately)
20 pin cable
(supplied)
6 m
Red
Blue
Blue
Red
IP-BUS-RCA-Interconnector
(CD-RB20) (sold separately)
This product
16 cm
Yellow
Voice guidance speaker
(VIDEO INPUT)
(supplied)
Not used.
40 cm
3 m
Blue
40 cm
Head Unit
(sold separately)
When Using a Display Connected Rear Video Output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or
Video CD while Driving.
This product
Yellow (REAR
VIDEO OUTPUT)
16 cm
Red (audio output (Right))
RCA cable (supplied)
RCA cable (sold separately)
6 m
To video input
To audio inputs
Display with RCA
input jacks
Fig. 3
Connecting the Power Cord
16 cm
16 cm
White (audio output (Left))
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.
Fig. 4
This Product
16 cm
White (audio output (Left))
(REAR OUTPUT)
16 cm
Red (audio output (Right))
(REAR OUTPUT)
16 cm
Yellow (rear video output)
(REAR VIDEO OUTPUT)
Yellow (AVM output)
16 cm
(AVM OUTPUT)
Yellow (video input)
16 cm
(VIDEO INPUT)
Fuse resistor
Fuse holder
<ENGLISH>
Connection method
1.
Clamp the parking brake
switch power supply side
lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side
of the parking brake switch.
Parking brake switch
Power supply side
Ground side
Fig. 5