Pioneer DV-3020V Istruzioni per l'uso
Sfoglia online o scarica il pdf Istruzioni per l'uso per Lettore DVD Pioneer DV-3020V. Pioneer DV-3020V 2. dvd player
DVD Player
DV-3022V/DV-3020V
DV-2022/DV-2020
Operating Instructions
English on top side.
Italiano sul lato opposto.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly.
After you have finished reading the instructions, put them away in a safe place for future reference.
Table of contents
<Lower half>
<Upper half>
4 Changing the settings
1 Before you start
5 Playable discs and files
2 Part names and functions
6 Troubleshooting
3 Convenient functions
7 Additional information
What's in the box
• Remote Control
• AAA batteries (R03) x 2
• Warranty card
• Operating instructions (This document)
© 2012 PIONEER CORPORATION.
Discover the benefits of registering your product online at
http://www.pioneer.co.uk
(or http://www.pioneer.eu).
Download an electronic version of this manual from our website.
J2P00821A SH
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
K002_B2_En
Printed in Thailand
2
Part names and functions
3 TOP MENU
Remote control
Press to display the top menu of the DVD-Video.
/ / /
4
Use these to select items, change settings and move
the cursor.
1
5 HOME MENU
Press to display/hide HOME MENU.
HOME MENU
2
DVD
Audio Settings
15
Play Mode
16
3
17
Initial
Settings
4
• Audio Settings (section 4)
• Video Adjust (section 4)
• Play Mode (see f PLAY MODE on the right column)
• Disc Navigator (see h MENU on the right column)
• Initial Settings (section 4)
5
18
6
19
6 STOP
To resume play, press STOP once during playback. If
7
20
you press PLAY after that, playback starts from the
8
point you last stopped.
9
21
To cancel resume play, press STOP again while
10
playback is stopped.
11
22
12
7 //
13
23
• Press during playback to fast-reverse.
14
• Press in the pause mode to move backward
frame-by-frame.
• Press and hold in the pause mode to play back
DV-3022V
slowly (reverse). Releasing the button stops slow
play.
8 PLAY
Press to start playback.
Note
9 PREV
The illustrations used in this operating instructions are
Press to return to the beginning of the currently playing
DV-3022V.
title, chapter, track or file. Press twice to move back to
the beginning of the previous title, chapter, track or file.
1 STANDBY/ON
Press to turn the power on and off.
a PAUSE
Press to stop playback temporarily. Press again to
2 Number buttons (0 to 9)
resume.
Use these to specify and play the title, chapter, track or
file. Also use to select items on MENU screens, etc.
4
Changing the settings
The factory default settings are indicated in italic.
Initial Settings parameters
• The player's detailed settings can be changed here.
Audio Settings parameters
• Initial Settings cannot be selected during playback.
Sound Retriever (High/Low/Off)
• The sound of a WMA or MP3 file is played with high
Digital Audio Out settings
sound quality. This is only valid for files with the
HDMI Out (DV-3022V/DV-3020V)
extension ".wma" or ".mp3".
• Select the audio signals to be output from the HDMI
• The effect depends on the file. Try different settings, and
choose the one providing the good effect.
OUT terminal (LPCM (2CH)/Auto/Off) according to the
connected HDMI-compatible device.
Equalizer (Off/Rock/Pop/Live/Dance/Techno/Classic/
Soft)
Digital Out
• Select according to the genre of music to be listened to.
• Select whether to output digital audio signals (On) from the
COAXIAL DIGITAL AUDIO OUT terminals or not (Off).
Audio DRC (High/Medium/Low/Off)
Dolby Digital Out
• This makes loud sounds weaker and weak sounds
louder.
• Select whether to output Dolby Digital audio signals
• This setting only affects Dolby Digital sound.
(Dolby Digital) or to convert them into linear PCM
• The effect depends on the volume of the connected units.
signals (Dolby Digital > PCM), according to the
connected unit.
Try different settings, and choose the one providing the
strongest effect.
DTS Out
Dialog (High/Medium/Low/Off)
• Select whether to output DTS audio signals (DTS) or not
• Change this setting if the sound of the dialogs is too low.
(Off), according to the connected unit.
96 kHz PCM Out
About Sound Retriever function
• Select whether to output 96 kHz audio signals (96kHz) or
When audio data is removed during the compression
to convert them into linear PCM signals (96kHz >
process, sound quality often degrades. The Sound Retriever
48kHz), according to the connected unit.
function automatically enhances compressed audio and
MPEG Out
restores CD quality sound.
• Select whether to output MPEG audio signals (MPEG) or
to convert them into linear PCM signals (MPEG > PCM),
Video Adjust parameters
according to the connected unit.
Sharpness (Fine/Standard/Soft)
Video Output settings
• Adjusts the picture's sharpness.
Brightness (-20 to +20)
TV Screen
• Adjusts the picture's brightness.
• Change the picture's display format (4:3 (Letter Box)/4:3
(Pan & Scan)/16:9 (Wide)/16:9 (Compressed)), according
Contrast (-16 to +16)
• Adjusts the ratio of the brightness of the brightest and
to the connected TV.
darkest portions of the picture.
The player's factory default settings are set as below.
DV-3022V/DV-3020V . . . . . . . . . . . . . . . . . . . . . . 16:9 (Wide)
Gamma (-3 to +3)
DV-2022/DV-2020 . . . . . . . . . . . . . . . . . . . . 4:3 (Letter Box)
• Adjusts the look of the dark portions of the picture.
• 16:9(Compressed) can only be set on DV-3022V and
Hue (green 9 to red 9)
DV-3020V.
• Adjusts the balance between green and red.
HDMI Resolution (DV-3022V/DV-3020V)
Chroma Level (-9 to +9)
• Change the resolution of the video signals output from
• Adjusts the density of the colors. This setting is effective
the HDMI OUT terminals (720x480i/720x576i/720x480p/
for sources with many colors, such as cartoons.
720x576p/1280x720p/1920x1080i/1920x1080p).
Brightness, Contrast, Gamma, Hue and Chroma Level are
HDMI Color (DV-3022V/DV-3020V)
set to 0 upon purchase.
• Change the video signals output from the HDMI OUT
terminal (Full range RGB/RGB/Component).
Deep Color (DV-3022V/DV-3020V)
• Select Auto when the connected TV or monitor is
compatible with Deep Color (Auto/Off).
6
Troubleshooting
• Incorrect operation is often mistaken for trouble or
Folder or file names are not displayed or properly
malfunction. If there is something wrong with this player,
displayed
check the symptoms below.
Only 1-byte alphanumeric characters can be displayed.
Sometimes the trouble lie in another component
Folder and file names including characters other than
connected to this player. Inspect the component and
1-byte alphanumeric characters may be displayed for
electrical appliances being used. If the trouble cannot be
example as F_007 or FL_001, and the characters may
rectified after checking the items below, ask your nearest
be garbled.
Pioneer authorized service center or your dealer to carry
out repair work.
Much time is required to play JPEG files.
• The player may not operate properly due to static
The player may take longer to display large files.
electricity or other external influences. In such cases,
normal operation may be restored by unplugging the
Black bars are displayed when playing JPEG files.
power cord then plugging it back in.
Black bars may be displayed along the top and bottom
Difference in volume between DVD and CD.
or sides when JPEG files with different aspect ratios
are played.
The volume may sound different due to differences in
how the signals are recorded on the disc.
When a USB device is connected
Disc cannot be played or disc tray opens automatically.
(DV-3022V/DV-2022)
If the disc is dirty, wipe the dirt off the disc (section 7).
USB device is not recognized.
Set the disc with the printed side facing up.
Check the disc's region number, and if the number is
Turn the power off, then disconnect and reconnect the
compatible for playback on the player (section 5).
USB device.
Only the discs with the appropriate region number or
This player does not support USB hubs. Connect the
"ALL" can be played.
USB device directly.
This player only supports USB mass storage class
The power turns off automatically.
devices.
If Auto Power Off is set to On, the power turns off
This player supports portable flash memory and digital
automatically if no operation has done for over 30
audio playback devices.
minutes (section 4).
Only the FAT16 and FAT32 file systems are supported.
Picture is stretched, or aspect ratio cannot be changed.
Other file systems (exFAT, NTFS, etc.) are not
supported.
Refer to the TV's operating instructions and set the TV's
If the USB device is equipped with an AC adapter, use
aspect ratio properly.
the USB device with the AC adapter connected.
Set TV Screen properly (section 4).
Some USB devices may not be recognized properly.
Picture is disturbed or dark during playback.
File cannot be played.
When the player and the TV are connected via a video
deck, "analog copy protect function" may cause the
Copyright-protected files cannot be played.
picture being played on the video deck not to display
Files stored on a computer cannot be played.
properly. Connect the player and TV directly.
It may not be able to play some files.
Set the TV system properly. The factory default setting
Folder or file names are not displayed or properly
is AUTO. If the picture is distorted, switch the TV
displayed.
system to the one used in your country or region (NTSC
or PAL) (section 7).
The maximum displayable number of characters for the
folder and file names on the Disc Navigator is 14.
96 kHz/88.2 kHz digital audio signals are not output
from the COAXIAL DIGITAL AUDIO OUT terminals.
Folder or file names are not displayed in alphabetical
order.
Set 96 kHz PCM Out to 96kHz > 48kHz.
The 96 kHz/88.2 kHz digital audio signals of copyright-
The order of the folder and file names displayed on the
protected discs cannot be output.
Disc Navigator is dependant on the time and date when
the folders or files were created on the USB device.
Folder or file names are not recognized.
Much time is required to recognized the USB device.
This player can recognize up to 299 folders on one
disc and 648 files within one folder. Depending on the
It may take longer to load data when a large capacity
folder structure, however, the player may not be able to
USB device is connected (this could take several
recognize certain folders or files.
minutes).
Safety cautions
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
CAUTION:
within an equilateral triangle, is intended to
TO PREVENT THE RISK OF ELECTRIC
alert the user to the presence of uninsulated
SHOCK, DO NOT REMOVE COVER (OR
"dangerous voltage" within the product's
BACK). NO USER-SERVICEABLE PARTS
enclosure that may be of sufficient
INSIDE. REFER SERVICING TO
magnitude to constitute a risk of electric
QUALIFIED SERVICE PERSONNEL.
shock to persons.
CAUTION
The
STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for the
unit, you will need to unplug it from the AC outlet to shut
down all power. Therefore, make sure the unit has been
installed so that the power cord can be easily unplugged
from the AC outlet in case of an accident. To avoid fire
hazard, the power cord should also be unplugged from the
AC outlet when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
WARNING
Before plugging in for the first time, read the following section
carefully.
Operating Environment
The voltage of the available power supply differs
according to country or region. Be sure that the power
Operating environment temperature and humidity:
supply voltage of the area where this unit will be used
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
meets the required voltage (e.g., 230 V or 120 V) written
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
on the rear panel.
locations exposed to high humidity or direct sunlight (or
D3-4-2-1-4*_A1_En
strong artificial light)
POWER-CORD CAUTION
All rights reserved.
VENTILATION CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
When installing this unit, make sure to leave space around
cord when your hands are wet as this could cause a
the unit for ventilation to improve heat radiation (at least 10
short circuit or electric shock. Do not place the unit, a
cm at top, 10 cm at rear, and 10 cm at each side).
K
00/00
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
WARNING
cords. The power cords should be routed such that they
Slots and openings in the cabinet are provided for ventilation
are not likely to be stepped on. A damaged power cord
to ensure reliable operation of the product, and to protect it
can cause a fire or give you an electrical shock. Check
from overheating. To prevent fire hazard, the openings should
the power cord once in a while. When you find it
never be blocked or covered with items (such as newspapers,
damaged, ask your nearest PIONEER authorized
table-cloths, curtains) or by operating the equipment on thick
service center or your dealer for a replacement.
carpet or a bed.
S002*_A1_En
Front panel
DV-3022V
b AUDIO
g CLEAR
Video Adjust
For discs or files including multiple audio streams/
Press to cancel the selected item.
channels, the audio stream/channel can be changed
Disc Navigator
h MENU
during playback.
• Press to display MENU screen or Disc Navigator.
c SUBTITLE
• Select the title, chapter, track or file from the Disc
On DVD-Video or DivX discs containing subtitles in
multiple languages, the subtitle can be changed during
i ENTER
playback.
Use this to implement the selected item or enter a
d OPEN/CLOSE
setting that you have changed.
Press to open and close the disc tray and load the disc.
j RETURN
e ZOOM
Press to return to the previous screen.
Press to zoom on the image.
k /
f DVD/USB (section 3) (DV-3022V/DV-2022)
• Press during playback to fast-forward.
Press to switch between DVD and USB modes.
• Press in the pause mode to move forward
PLAY MODE (DV-3020V/DV-2020)
• Press and hold in the pause mode to play back
• A-B Repeat
The specified section within a single title or track is
played repeatedly.
• Repeat
l NEXT
Plays titles, chapters, tracks or files repeatedly.
Press during playback to skips ahead to the beginning
• Random
of the next title, chapter, track or file.
Plays titles, chapters or tracks in random order.
m ANGLE
• Program
See section 3 for details.
• On DVD-Video discs containing multiple angles, the
• Search Mode
• Press and hold during the Audio CD playback to
Plays the specified number or time within the title,
chapter, track or file.
Each time you press and hold, the repeat mode
The Play Mode function may not work for some discs
or files.
n DISPLAY
The elapsed time, amount remaining, etc., is displayed.
Language settings
Options settings
Audio Language
Control (DV-3022V/DV-3020V)
• Change the language when listening to the sound of
• Select whether to operate the player using the remote
DVD-Video discs (English/available languages/Other
control of the AV component connected using an HDMI
cable (On) or not (Off).
Language).
Subtitle Language
Parental Lock
• Change the language of the subtitles displayed for
• Restrict DVD-Video viewing (Password/Level Change/
DVD-Video discs (English/available languages/Other
Country Code).
Language).
DivX VOD
DVD Menu Lang.
• Display the registration code required for playing DivX
• Change the language used for the menu displays of
VOD files (Activate/Deactivate).
DVD-Video discs (w/Subtitle Lang./available languages/
Auto Power Off
Other Language).
• Select whether to turn the power off automatically (On)
Subtitle Display
or not (Off). When set to On, the power automatically
• Select whether to display subtitles (On) or not (Off).
turns off if no operation is performed for 30 minutes or
more.
Display settings
Restoring all the settings to the
OSD Language
defaults
• Change the language of the operation messages (Play,
Stop, etc.) displayed on the TV screen (English/available
While the player is in the standby mode...
languages).
Press STANDBY/ON while pressing .
Angle Indicator
Use the buttons on the front panel.
• Select whether to display the angle mark on the TV
screen (On) or not (Off).
On Screen Display
• Select whether to display operation messages (Play,
Stop, etc.) on the TV screen (On) or not (Off).
7
When connected to an HDMI-
Setting the TV system
compatible device
• If the picture of the disc being played is distorted, switch
(DV-3022V/DV-3020V)
the TV system to the one used in your country or region.
• When the TV system is switched, the types of discs that
Picture is not displayed.
can be played are limited.
• The factory default setting is AUTO.
Restore HDMI Resolution to the default setting
(720x480p/720x576p) (section 4).
While the player is in the standby mode...
With some cables, 1 080p video signals cannot be
Press STANDBY/ON while pressing .
output.
Use the buttons on the front panel.
The power turns on and the TV system switches as
Multichannel audio signals are not output.
shown below.
Set HDMI Out to Auto (section 4).
• AUTONTSC
• NTSCPAL
Control function does not work.
• PALAUTO
Use a High Speed HDMI
cable.
®
Set Control to On on the player (section 4).
Types of
The control function does not work with devices of
discs/files
other brands. Even when connected to a Pioneer
product compatible with the Control function, some of
the functions may not work.
The message CEC200 appears.
When the Disc Navigator is selected using the Flat
Screen TV's remote controller and the player is turned
off, the message CEC200 will be displayed. This is not
a malfunction.
Turn on the player to use the function.
no disc
The player turns on or off automatically.
The player may turn on together with the TV connected
Cautions on use
to HDMI OUT terminal. If you do not want them to turn
on at the same time, set Control to Off (section 4).
When moving the player
The input of the connected TV or AV system is switched
When moving the player, check first that there is no
to the player's automatically.
disc loaded and that the disc tray is closed. Then press
The input of the TV and AV system (AV receiver or
STANDBY/ON on the player (or STANDBY/ON on the
amplifier, etc.) connected to the HDMI OUT terminal
remote control), wait for the OFF indicator on the front
may be automatically switched to the player when
panel display to turn off, then unplug the power cord.
playback starts on the player or the menu screen
Moving the player with a disc inside it could result in
(HOME MENU, etc.) is displayed. If you do not want the
damage.
connected TV and AV system (AV receiver or amplifier,
etc.) affected by the player's operation, set Control to
Place of installation
Off (section 4).
• Choose a stable place near the TV or stereo system
being used with the player.
• Do not place the player on top of a TV or color monitor.
Also install it away from cassette decks and other
devices easily affected by magnetic forces.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette smoke
• Places exposed to soot, steam or heat (kitchens, etc.)
WARNING
This equipment is not waterproof. To prevent a fire or shock
hazard, do not place any container filled with liquid near
this equipment (such as a vase or flower pot) or expose it to
dripping, splashing, rain or moisture.
The exclamation point within an
CAUTION
equilateral triangle is intended to alert
This product is a class 1 laser product classified
the user to the presence of important
under the Safety of laser products, IEC 60825-1:2007.
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
CLASS 1 LASER PRODUCT
D3-4-2-1-1_A1_En
If the AC plug of this unit does not match the AC outlet
you want to use, the plug must be removed and
Information for users on collection and
appropriate one fitted. Replacement and mounting of
disposal of old equipment and used
an AC plug on the power supply cord of this unit
batteries
should be performed only by qualified service
personnel. If connected to an AC outlet, the cut-off
These symbols on the products, packaging, and/or
plug can cause severe electrical shock. Make sure it is
accompanying documents mean that used electrical and
properly disposed of after removal.
electronic products and batteries should not be mixed
The equipment should be disconnected by removing
with general household waste.
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
For proper treatment, recovery and recycling of old
vacation).
products and used batteries, please take them to
D3-4-2-2-1a_A1_En
applicable collection points in accordance with your
national legislation.
This product is for general household purposes. Any
By disposing of these products and batteries correctly,
failure due to use for other than household purposes
you will help to save valuable resources and prevent any
(such as long-term use for business purposes in a
potential negative effects on human health and the
restaurant or use in a car or ship) and which requires
environment which could otherwise arise from
repair will be charged for even during the warranty
inappropriate waste handling.
period.
K041_A1_En
For more information about collection and recycling of old
products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your
D3-4-2-1-7c*_A1_En
local authorities or dealer and ask for the correct method
of disposal.
Symbol for
Symbol examples
equipment
for batteries
D3-4-2-1-7b*_A1_En
8
6
1
<Only for the front panel>
1 Disc tray
2 Front panel display
Navigator to play back.
3 HDMI indicator (DV-3022V/DV-3020V)
Lights when the de vice connected to the HDMI OUT
terminal is recognized.
4 OPEN/CLOSE
5 USB port (type A) (DV-3022V/DV-2022)
/
frame-by-frame.
slowly (forward). Releasing the button stops slow
play.
angle can be changed during playback.
repeat the disc/track.
changes between the disc repeat and track repeat
mode.
5
Playable discs and files
Playable discs
DVD-Video discs
DVD-R/-RW/-R DL and
DVD+R/+RW/+R DL discs recorded in
the Video mode
DVD-R/-RW/-R DL discs recorded in the
VR mode
Video CDs (including Super VCDs)
Audio CDs
CD-R/-RW/-ROM discs containing
music recorded in the CD-DA format
JPEG files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
DivX video files recorded on
DVD-R/-RW/-R DL discs, CD-R/-RW/-ROM
discs
WMA files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
MP3 files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs
FUJICOLOR-CD
KODAK Picture CD
• Only the discs that have been finalized can be played.
•
is a trademark of DVD Format/Logo Licensing
Corporation.
is a trademark of FUJIFILM Corporation.
•
•
This label indicates playback compatibility with DVD-RW
discs recorded in VR format (Video Recording format).
However, for discs recorded with a record-only-once
encrypted program, playback can only be achieved using
a CPRM compatible device.
Notes
This player does not support multisession discs or
multiborder recording.
Multisession/multiborder recording is a method in which
data is recorded on a single disc in two or more
sessions/borders. A "session" or "border" is one
recording unit, consisting of a complete set of data from
lead-in to lead-out.
Additional information
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place the player on top of an amplifier or other
component that generates heat. When placing it in a rack,
to avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
Turn off the player's power when
not using it.
Depending on signal conditions, striped patterns may
Player setting
appear on a TV screen and noise may enter the sound of
Format
NTSC
PAL
AUTO
radio broadcasts when the player's power is on. If this
NTSC
NTSC
PAL
NTSC
happens, turn the player's power off.
About condensation
PAL
NTSC
PAL
PAL
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the temperature
in the room in which the player is installed rises suddenly
NTSC or
due to a heater, etc., water droplets (condensation) may
—
NTSC
PAL
PAL
form inside (on operating parts and the lens). When
condensation is present, the player will not operate
properly and playback is not possible. Let the player stand
at room temperature for 1 or 2 hours with the power turned
on (the time depends on the extent of condensation). The
water droplets will dissipate and playback will become
possible. Condensation can also occur in the summer if the
player is exposed to the direct wind from an air-conditioner.
If this happens, move the player to a different place.
Cleaning the product
• Unplug the power cord from the power outlet when
cleaning the player.
• Clean the player using a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a
soft cloth, wring out thoroughly, wipe off the dirt, then
wipe again with a soft, dry cloth.
• Alcohol, thinner, benzene, insecticides, etc., could cause
the print or paint to peel off. Also, leaving rubber or vinyl
products in contact with the player for long periods of
time could mar the cabinet.
• When using chemical-impregnated wipes, etc., read the
cautions included with the wipes carefully.
Caution for when the unit is
installed in a rack with a glass door
Do not press OPEN/CLOSE on the remote control to open
the disc tray while the glass door is closed. The door will
hamper the movement of the disc tray, and the unit could
be damaged.
1
Specifications
Power requirements . . . . . . .AC 220 V to 240 V, 50 Hz/60 Hz
Loading the batteries in
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
the remote control
11 W (DV-3022V), 7 W (DV-3020V), 10 W (DV-2022),
6 W (DV-2020)
• Open the rear lid and insert the batteries.
Power consumption (standby) . . . . . . . . . . . . . . . . . . . 0.5 W
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 kg
D3-4-2-1-3_A1_En
WARNING
External dimensions
. . . . . . . . . . . . . . . . . 360 mm (W) x 42 mm (H) x 200 mm (D)
Do not use or store batteries in direct sunlight or other
Tolerable operating temperature . . . . . . . . +5 °C to +35 °C
excessively hot place, such as inside a car or near a heater.
Tolerable operating humidity . . . . . . . . . . . . . . . . . 5 % to 85 %
This can cause batteries to leak, overheat, explode or catch
(no condensation)
fire. It can also reduce the life or performance of batteries.
AV Connector (21-pin connector assignment)
Notes
AV connector output . . . . . . . . . . . . . . . . . 21-pin connector
• When inserting the batteries, make sure not to damage
This connector provides the video and audio signals for
the springs on the battery's () terminals.
connection to a compatible colour TV or monitor.
• Do not use any batteries other than the ones specified.
D58-5-2-2a_A1_En
PIN no.
Also, do not use a new battery together with an old one.
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio 2/R out
• When loading the batteries into the remote control, set
3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out
them in the proper direction, as indicated by the polarity
4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND
marks ( and ).
7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B out
• Do not heat batteries, disassemble them, or throw them
8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status
into flames or water.
11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G out
• Batteries may have different voltages, even if they are
15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R out
the same size and shape. Do not use different types of
17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND
batteries together.
19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Video out
• To prevent leakage of battery fluid, remove the batteries
21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert
new batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large quantities
of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution's rules that apply in your country/area.
Video output
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
Connections
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal
There are three different ways to connect to this device:
HDMI output (Only for DV-3022V/DV-3020V)
using a audio/video cable, HDMI cable, or a SCART AV
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-pin
cable. To connect, refer to the following.
• Only DV-3022V and DV-3020V have HDMI OUT
Audio output (stereo L/R)
terminal.
Audio output level . . . . . . . . . . . 200 mVrms (1 kHz, -20 dB)
Player's rear panel
Output terminal . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal
Frequency response . . . . . . . . . . . . . . . . . . . . .4 Hz to 44 kHz
Digital audio output
Coaxial digital output. . . . . . . . . . . . . . . . . . . . RCA terminal
Additional information (Only for DV-3022V/DV-2022)
DV-3022V
USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A type
HDMI cable
(commercially available)
Notes
• The specifications and design of this product are subject
Pb
to change without notice.
• This product includes FontAvenue® fonts licensed by
NEC Corporation. FontAvenue is a registered trademark
of NEC Corporation.
K058a_A1_En
TV or AV receiver
3
Convenient functions
Playing in the desired
Playing files on USB
order (Programmed Play)
devices
• The player may not recognize the USB device, play files
or supply power to the USB device. For details, see When
1
Display the Play Mode screen.
a USB device is connected in section 6.
• Pioneer does not support that all files recorded on all
Select Play Mode from HOME MENU screen.
USB devices will play or that power will be supplied to
2
Select Program.
the USB device. Also note that Pioneer will accept no
responsibility whatsoever for loss of files on USB devices
Use
/
to select, then press ENTER or
.
caused by connection to this player.
3
Select Create/Edit.
1
Switch to USB mode.
Use
/
to select, then press ENTER.
Press DVD/USB.
• The Create/Edit screen differs according to the disc
USb is displayed on the front panel display.
or file.
2
Connect the USB device.
4
Select the title, chapter, track or file.
Connect the USB device to the USB port on the front
Use
/
/
/
to select, then press ENTER.
panel (section 2).
• To add to a program, first select the place in the
The Disc Navigator appears automatically.
program (the program step), next select the title,
chapter, track or file then press ENTER (files are
3
Start playback.
added at the end of program).
Use
/
• Press RETURN to return to the previous screen. If you
• Turn the power off before removing the USB device.
return to the previous screen when inputting it, the
• To return to DVD mode, press DVD/USB or OPEN/
settings you have programmed are cleared.
CLOSE.
• To delete a step, highlight it and press CLEAR.
5
Start playback.
Press PLAY.
• To play the program, select Playback Start from the
program screen, then press ENTER.
• To resume normal playback, select Playback Stop
from the program screen, then press ENTER. The
program remains in the memory.
• To cancel the entire program, select Program Delete
from the program screen, then press ENTER.
Notes
• Programs can be played repeatedly. Select Program
Repeat from Repeat on the Play Mode screen during
programmed playback.
• Programs cannot be played in random order (random
play is not possible during programmed play).
Discs that cannot be played
Playable files
• Blu-ray discs
• Only discs recorded in ISO9660 Level 1, Level 2 and Joliet
• HD DVDs
can be played.
• AVCHD
• Files protected by DRM (Digital Rights Management)
• AVCREC
cannot be played.
• DVD-Audio discs
• Files other than the ones below (WMV, MPEG4-AAC, etc.)
• DVD-RAM discs
are not guaranteed to play.
• SACDs
• CD-G
Supported video file formats
• Discs recorded with packet writing
• Programs that can be recorded only once and that are
DivX
(already) recorded on a DVD-R/-RW/-R DL
• DivX is a media technology created by DivX, Inc. DivX
media files contain image data.
About region numbers
• DivX files may also include such advanced playback
functions as menu screens and selection of multiple
All DVD-Video discs carry a region mark (number) on the
subtitle languages/audio tracks.
case. The mark (number) denotes the region(s) of the
world in which the disc is compatible. Your DVD player
also has a region mark (number), which you can find on
the rear panel.
If you try to play a disc of an incompatible region,
"Incompatible disc region number Can't play disc" will
be displayed on the screen and you will not be able to play
• DivX®, DivX Certified® and associated logos are
the disc. Discs marked "ALL" can be played in any player.
trademarks of DivX, Inc. and are used under license.
The diagram below shows the various DVD regions of
Displaying external subtitle files
the world.
• The font sets listed below are available for external
subtitle files. You can see the proper font set on-screen
by setting the Subtitle Language in section 4 to match
1
the subtitle file.
5
• This player supports the following language groups:
2
1
6
Afrikaans (af), Basque (eu), Catalan (ca), Danish
2
3
(da), Dutch (nl), English (en), Faroese (fo), Finnish
3
4
5
(fi), French (fr), German (de), Icelandic (is), Irish
Group 1
(ga), Italian (it), Norwegian (no), Portuguese (pt),
2
Rhaeto-Romanic (rm), Scottish (gd), Spanish (es),
4
Swedish (sv)
Albanian (sq), Croatian (hr), Czech (cs), Hungarian
Regarding copy protected CDs
Group 2
(hu), Polish (pl), Romanian (ro), Slovak (sk),
Slovenian (sl)
This player is designed to conform to the specifications
Bulgarian (bg), Byelorussian (be), Macedonian (mk),
of the audio CD format. This player does not support the
Group 3
Russian (ru), Serbian (sr), Ukrainian (uk)
playback or function of discs that do not conform to these
Group 4
Hebrew (iw), Yiddish (ji)
specifications.
Group 5
Turkish (tr)
Playing discs created on computers
• Some external subtitle files may be displayed incorrectly
or BD/DVD recorders
or not at all.
• The player may not be able to play discs recorded using
• For external subtitle files the following subtitle format
a computer. Record discs in a format playable on this
filename extensions are supported (please note that
player. For details, contact the dealer.
these files are not shown within the disc navigation
menu): .srt, .sub, .ssa, .smi
• The player may not be able to play discs recorded using
a computer or a BD/DVD recorder, if burn quality is not
• The filename of the movie file has to be repeated at the
good due to characteristics of the disc, scratches, dirt on
beginning of the filename for the external subtitle file.
the disc, dirt on the recorder's lens, etc.
• The number of external subtitle files which can be
switched for the same movie file is limited to a maximum
of 10.
Cleaning the lens
About trademarks
The player's lens should not become dirty in normal use,
but if for some reason it should malfunction due to dust
or dirt, consult your nearest Pioneer authorized service
center. Although lens cleaners for players are commercially
available, we advise against using them since some may
damage the lens.
About copyrights
HDMI, the HDMI Logo and High-Definition Multimedia
This item incorporates copy protection technology that is
Interface are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
countries.
disassembly are prohibited.
Language Code Table
Handling discs
Language names (codes) an input codes
Storing
Japanese (ja), 1001
English (en), 0514
Always place discs in their cases and store them
French (fr), 0618
vertically, avoiding places hot, humid, exposed to direct
German (de), 0405
sunlight and extremely cold.
Italian (it), 0920
Be sure to read the cautions included with the disc.
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Cleaning discs
Portuguese (pt), 1620
Swedish (sv), 1922
Discs may not play if there are fingerprints or dust on
Russian (ru), 1821
them. In this case, use a cleaning cloth, etc., to gently
Korean (ko), 1115
wipe the disc from the inside towards the outside. Do not
Greek (el), 0512
use dirty cleaning cloths.
Afar (aa), 0101
Do not use benzene, thinner or other volatile chemicals.
Abkhazian (ab), 0102
Afrikaans (af), 0106
Also do not use record spray or antistatic agents.
Amharic (am), 0113
For tough dirt, apply some water to a soft cloth, wring
Arabic (ar), 0118
out thoroughly, wipe off the dirt, then wipe off the
Assamese (as), 0119
moisture with a dry cloth.
Aymara (ay), 0125
Azerbaijani (az), 0126
Do not use damaged (cracked or warped) discs.
Bashkir (ba), 0201
Do not let the signal surface of discs get scratched or
Byelorussian (be), 0205
dirty.
Bulgarian (bg), 0207
Do not place two discs in the disc tray, one on top of the
Bihari (bh), 0208
Bislama (bi), 0209
other.
Bengali (bn), 0214
Do not attach pieces of paper or stickers to discs. Doing
Tibetan (bo), 0215
so could warp discs, making it impossible to play them.
Breton (br), 0218
Catalan (ca), 0301
Also note that rental discs often have labels attached to
Corsican (co), 0315
them, and the label's glue may have oozed out. Check
Czech (cs), 0319
that there is no glue around the edges of such labels
Welsh (cy), 0325
before using rented discs.
Danish (da), 0401
Country/Area Code Table
About specially shaped discs
Specially shaped discs (heart-
Country/Area name, Input codes and Country/Area code
shaped, hexagonal, etc.) cannot
United States, 2119, us
be played on this player. Do not
Argentina, 0118, ar
United Kingdom, 0702, gb
attempt to play such discs, as they
Italy, 0920, it
could damage the player.
India, 0914, in
Indonesia, 0904, id
About condensation on discs
Australia, 0121, au
Austria, 0120, at
Water droplets (condensation) may form on the surface of
Netherlands, 1412, nl
discs if they are moved from a cold place (particularly in
Canada, 0301, ca
Korea, Republic of, 1118, kr
winter) into a warm room. Discs may not play normally if
Singapore, 1907, sg
there is condensation on them. Carefully wipe the water
droplets off the surface of the disc before loading it.
Before you start
Player's rear panel
SCART AV cable
(commercially available)
TV or AV
reciever
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Notes for DV-3022V/DV-3020V
• Signals can be transferred to an HDMI-compatible TV
without loss of picture or sound quality using an HDMI
cable.
Follow the TV instructions after the connections, then set
HDMI Resolution (section 4).
• This player's interface is designed according to the
High-Definition Multimedia Interface specifications.
• When an HDMI-compatible device is connected, the
resolution is displayed on the front panel display.
• The resolution of the video signals output from the
HDMI OUT terminal can be changed manually. Change
the HDMI Resolution setting (section 4). Settings for two
units can be stored in the memory.
• This player is designed for connecting to HDMI-
compatible devices. It may not operate properly if
connected to DVI devices.
Playable audio signals through the
HDMI OUT terminal (DV-3022V/
DV-3020V)
• 44.1 kHz to 96 kHz, 16-bit/20-bit/24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
Connecting using commercially
White
available cables
Red
• The player can be connected to an AV amplifier, etc.,
using commercially available digital audio cables.
Yellow
Audio/video cable
(commercially available)
Match the direction
of the plug to the
terminal and insert
straight.
TV or AV receiver
Copying files on to USB
devices
(DV-3022V/DV-2022)
(DV-3022V/DV-2022)
Files stored on the discs can be copied on to the USB
device through the player.
1
Display the Disc Navigator screen.
Press MENU.
• Press STOP to stop playback if the file is being
played.
2
Select the file.
Use
/
/
/
to select, then press
.
3
Start copying.
Use
/
to select Yes, then press ENTER.
The file copying process will appear on the screen.
Notes
• Do not operate any buttons during the file copying
process.
• A folder named "PIONEER" is automatically created on
/
/
to select the file, then press ENTER.
the USB device.
The copied files are stored in this folder.
Supported image file formats
JPEG
• Resolution: Up to 3 072 x 2 048 pixels
• This player supports baseline JPEG.
• This player supports Exif Ver.2.2.
• This player does not support progressive JPEG.
Supported audio file formats
• This player does not support VBR (Variable Bit Rate) and
lossless encoding.
Windows Media™ Audio (WMA)
• Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
• Bit rate: Up to 192 kbps
• This player supports files encoded using Windows Media
Player Ver. 7/7.1, Windows Media Player for Windows XP
and Windows Media Player 9 Series.
• Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United States
and/or other countries.
• This product includes technology owned by Microsoft
Corporation and cannot be used or distributed without a
license from Microsoft Licensing, Inc.
MPEG-1 Audio Layer 3 (MP3)
• Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
Playable file extensions
Video files
.divx .avi
• Files not containing DivX video signals cannot be played,
even if they have the extension ".avi".
Image files
.jpg .jpeg
Audio files
.wma .mp3
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Bhutani (dz), 0426
Kirghiz (ky), 1125
Sinhalese (si), 1909
Esperanto (eo), 0515
Latin (la), 1201
Slovak (sk), 1911
Estonian (et), 0520
Lingala (ln), 1214
Slovenian (sl), 1912
Basque (eu), 0521
Laothian (lo), 1215
Samoan (sm), 1913
Persian (fa), 0601
Lithuanian (lt), 1220
Shona (sn), 1914
Finnish (fi), 0609
Latvian (lv), 1222
Somali (so), 1915
Fiji (fj), 0610
Malagasy (mg), 1307
Albanian (sq), 1917
Faroese (fo), 0615
Maori (mi), 1309
Serbian (sr), 1918
Frisian (fy), 0625
Macedonian (mk), 1311
Siswati (ss), 1919
Irish (ga), 0701
Malayalam (ml), 1312
Sesotho (st), 1920
Scots-Gaelic (gd), 0704
Mongolian (mn), 1314
Sundanese (su), 1921
Galician (gl), 0712
Moldavian (mo), 1315
Swahili (sw), 1923
Guarani (gn), 0714
Marathi (mr), 1318
Tamil (ta), 2001
Gujarati (gu), 0721
Malay (ms), 1319
Telugu (te), 2005
Hausa (ha), 0801
Maltese (mt), 1320
Tajik (tg), 2007
Hindi (hi), 0809
Burmese (my), 1325
Thai (th), 2008
Croatian (hr), 0818
Nauru (na), 1401
Tigrinya (ti), 2009
Hungarian (hu), 0821
Nepali (ne), 1405
Turkmen (tk), 2011
Armenian (hy), 0825
Norwegian (no), 1415
Tagalog (tl), 2012
Interlingua (ia), 0901
Occitan (oc), 1503
Setswana (tn), 2014
Interlingue (ie), 0905
Oromo (om), 1513
Tonga (to), 2015
Inupiak (ik), 0911
Oriya (or), 1518
Turkish (tr), 2018
Indonesian (in), 0914
Panjabi (pa), 1601
Tsonga (ts), 2019
Icelandic (is), 0919
Polish (pl), 1612
Tatar (tt), 2020
Hebrew (iw), 0923
Pashto, Pushto (ps), 1619
Twi (tw), 2023
Yiddish (ji), 1009
Quechua (qu), 1721
Ukrainian (uk), 2111
Javanese (jw), 1023
Rhaeto-Romance (rm), 1813
Urdu (ur), 2118
Georgian (ka), 1101
Kirundi (rn), 1814
Uzbek (uz), 2126
Kazakh (kk), 1111
Romanian (ro), 1815
Vietnamese (vi), 2209
Greenlandic (kl), 1112
Kinyarwanda (rw), 1823
Volapük (vo), 2215
Cambodian (km), 1113
Sanskrit (sa), 1901
Wolof (wo), 2315
Kannada (kn), 1114
Sindhi (sd), 1904
Xhosa (xh), 2408
Kashmiri (ks), 1119
Sangho (sg), 1907
Yoruba (yo), 2515
Kurdish (ku), 1121
Serbo-Croatian (sh), 1908
Zulu (zu), 2621
Switzerland, 0308, ch
Norway, 1415, no
Sweden, 1905, se
Pakistan, 1611, pk
Spain, 0519, es
Philippines, 1608, ph
Thailand, 2008, th
Finland, 0609, fi
Taiwan, 2023, tw
Mexico, 1324, mx
China, 0314, cn
Brazil, 0218, br
Chile, 0312, cl
France, 0618, fr
Denmark, 0411, dk
Belgium, 0205, be
Germany, 0405, de
Portugal, 1620, pt
Japan, 1016, jp
Hong Kong, 0811, hk
New Zealand, 1426, nz
Malaysia, 1325, my